Table of Contents
Advertisement
Ethernet data connection establishment
Product setup
Connect the socket strip to a 230V mains socket outlet. Use a grounded outlet only. Connect
the Ethernet network cable, then turn on the power switch of the device (I O labeled rocker
switch). After about 10 seconds the device is available on the computer network with default
connection settings.
IP address: 192.168.0.250
Subnet Mask: 255.255.255.0
Web port: 80
You can now connect the remotely switched 230V powered devices as you wish.
The product is supplied with the relays switched on, so after switching on the first time, all
four sockets will be powered with 1-2-3-4 seconds delay.
Advertisement
Table of Contents
