Stopping Your Pc - HP Net Vectra User Manual

1 Setting Up and Using Your PC
Starting and Stopping Your PC
When the PC is switched on, the Vectra Logo is displayed. The PC
performs a Power-On-Self-Test (POST). Press
view the POST details in the HP Summary Screen.
If an error is detected during the Power-On-Self-Test, the PC will
automatically display the error. You may be prompted to press
to start the Setup program to correct the error.
2 The software initialization routine starts. It gives you an opportunity
to read Working in Comfort (ergonomic advice for computer users),
displays the software license agreement, and then asks questions
about the PC. For example:
The name of the person who will use the PC and your company
•
name. (If necessary, the name of the user can be modified later.)
3 While the initialization program is running, you can complete the
reply card that you will find supplied with this manual. When the
initialization routine has finished, click on OK and the PC will restart.
After Your PC Has Restarted
Set the keyboard to a comfortable position.
Adjust the display screen's brightness and contrast to suit your
needs. If the picture does not fill the screen or is not centered, adjust
it using the controls on the display. Refer to the display's manual for
details.

Stopping Your PC

To stop the PC, press the power button on the control panel. If you
have any unsaved documents, you will be prompted to save the data
before the PC performs a system shut down.
Refer to the preloaded online documents for more information about
the preloaded HP software which provide this data protection feature.
8 English
if you want to