Connecting The Mouse, Keyboard, Display And Printer - HP Net Vectra User Manual

Parallel Connector
NOTE

Connecting the Mouse, Keyboard, Display and Printer

Connect the mouse, keyboard, and display to the back of the computer.
The connectors are shaped to go in one way only. Tighten the
display cable attachment screws.
Connect the printer cable to the back of the computer and tighten the
attachment screws. Use the connector labeled:
Parallel (25-pin parallel connector) for a parallel device
•
Serial (9-pin serial connector) for a serial device.
•
Serial Connectors
The Universal Serial Bus (USB) connectors are between the serial
connectors and can be used for USB accessories. Most USB accessories
are automatically configured as soon as they are physically attached to
the PC. USB is not supported by all operating systems. If the USB
drivers are not available on your PC, they can be obtained from HP's
electronic services.
1 Setting Up and Using Your PC
Connecting the Mouse, Keyboard, Display and Printer
Display
USB
(see note below)
Mouse
Keyboard
English 3