Wall To Cable Tv Set-Top Box Or Satellite Box To Vcr To Tv, Using Coaxial Cable - HP Media Center,Pavilion Media Center m7780 Start Here Manual

Wall to cable TV set-top box or satellite box to
VCR to TV, using coaxial cable
1 Disconnect the coaxial cable from the input to the VCR, and connect it to the input of a
coaxial cable signal splitter (not included; available at electronics stores).
2 Connect two coaxial cables to the splitter outputs.
3 Connect one of these cables to the input of the VCR, and the other one to the TV
connector on the back of the computer.
4 Connect the remote control sensor cable (emitter), and position it on your set-top box
or satellite box. This enables the computer to change the channel on the box. See
"Connecting the Remote Sensor."
Existing setup Setting the computer with a splitter
A
B
C
D
E
C
F
G
C
H
A
B
C
D
E
C
J
K
K
C
C
F
G
C
A
H
B
C
D
E
F
G
H
J
K
L
M
N
Connecting the Television Signal and Video Cables
M
N
L
Wall
Cable outlet
Coaxial cable
Set-top box/Satellite In
Set-top box/Satellite Out
VCR In
VCR Out
TV In
Splitter In
Splitter Out
TV In on back of computer
Remote control sensor cable
Remote control sensor
45