Wall to cable TV set-top box or satellite box to
VCR to TV, using coaxial cable
Disconnect the coaxial cable from the input to the VCR, and connect it to the input of a
coaxial cable signal splitter (not included; available at electronics stores).
Connect two coaxial cables to the splitter outputs.
Connect one of these cables to the input of the VCR, and the other cable to the TV
connector on the back of the computer.
Connect the remote control sensor cable (emitter), and position it on the set-top box or
satellite box. This enables the computer to change the channel on the box. See
"Connecting the Remote Sensor."
Setting up the computer with a splitter
Set-top box/Satellite In
Set-top box/Satellite Out
TV In on back of computer
Remote control sensor cable
Remote control sensor
Connecting the Television Signal and Video Cables