Camera Software Settings - DeLaval FMC-IP1.1 Manual

DeLaval farm monitoring camera FMC-IP1.1
Operation
© DeLaval 2021.
2021-12-07

1.6 Camera software settings

These settings are used to adjust the camera to
the specific environment conditions. Functions
covered by settings options differ depending on
the used devices (mobile application or PC
application).
The mobile application uses basic functions.
For more information, see
the iOS application" on page 44 and
Ä Chapter 3 "Using the Android applica-
tion" on page 59.
All functions of the software settings are availa-
ble in the PC application.
It is possible to change the settings in a web
browser. This option allows to set the camera
for VMS and save the Wi-Fi settings. For more
Ä Chapter 4 "Using the cam-
information, see
era setting webpage" on page 70.
The following settings are available for different
areas in the PC application ("DeLaval FMC-IP"
software):
n "Video Settings"
"Notification Settings"
n
n "Scheduled Recording to SD-card"
n "Task Settings"
n "Camera Settings"
n "About Camera"
To open the settings menu:
1. Click the "Settings" icon in the menu bar.
ð The "Settings" icon becomes red.
2. Click the selected camera.
38 (88)
Ä Chapter 2 "Using