Table of Contents
Advertisement
Sensor Flex
UniPing server solution v4/SMS, UniPing server solution v3 Terminal Block
Green
Yellow (White)
Red
Black
Important! Sensors of a dry contact type, a supply voltage sensor, a leakage sensor, and others are plugged to
IO lines of a device. You can plug up to eight sensors of this set.
Important! A correspondent IO line should be set to an input mode in settings of a device.
A sensor is shipped with an inseparable cable with connectors at the end. A cable length can be extended
using RC-4 sensor cable
wire with a section no less than 0,4 mm
Supply Voltage Sensor
A supply voltage sensor is plugged by a two-line wire according to the
matter.
Sensor Flex
First wire
Second wire
Important! Sensors of a dry contact type, a supply voltage sensor, a leakage sensor, and others are plugged to
IO lines of a device. You can plug up to eight sensors of this set.
Important! A correspondent IO line should be set to an input mode in settings of a device.
A sensor is packaged with an inseparable cable, with connectors on the ends. A cable length can be increased with
the help
of flat cable extenders of
independently with the help of any wire with a minimum cross section of 0,4 mm
flat cable is 100 m.
Glass Breakage Sensors
A glass breakage sensor is plugged by a four-line wire according to the table:
[ENG] UniPing server solution v4/SMS & UniPing server solution v3, User guide -[USS] Sensors Plugin
extenders, that are consequentially plugged one into another or independently using any
2
. A maximum allowable loop length is 100 m.
RC-4 sensor, which are sequentially plugged one into another. Or it can be done
One of IO lines – 1 - 8
GND
+5V
GND
table. An order of plugging wires does not
UniPing server solution v4/SMS, UniPing server solution v3
One of IO lines – 1 - 8
GND
Terminal Block
2
. Maximum allowable length of a
[USS] Sensors Plugin
–
Advertisement
Table of Contents
