Biostar BVK2A Manual page 44

Chapter2
CPU Internal Cache
These two categories speed up memory access. However, it depends on
CPU/chipset design.
Enabled (default)
Disabled
External Cache
These fields allow you to Enable or Disable the CPU's "Level 2"
secondary cache. Caching allows better performance.
Enabled (default)
Disabled
CPU L2 Cache ECC Checking
This item allows you to enable/disable CPU L2 Cache ECC checking.
The Choices: Enabled (default), Disabled.
Quick Power On Self Test
This category speeds up Power on Self-Test (POST) after you power up
the computer. If it is set to Enable, Bios will shorten or skip some check
items during POST.
Enabled (default)
Disabled
First /Second/Third/ Boot Other Device
These BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
The Choices: Floppy, LS120, HDD-0, HDD-1, HDD-2, HDD-3, SCSI,
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive name
assignments.
The Choices: Enabled, Disabled (default).
BIOS Setup
Enable cache.
Disable cache.
Enable cache.
Disable cache.
Enable quick POST.
Normal POST.
CDROM, Enabled, ZIP, LAN, Disabled.
2-9