Integrated Peripherals - Biostar BVK2A Manual

Chapter2

2.5 Integrated Peripherals

Figure 5. Integrated Peripherals

CMOS Setup Utility-Copyright (C ) 1984-2000 Award Software
OnChip IDE Control
Muti-Media setting
Init Display First
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART 2 Mode
X IR Function Duplex
X TX,RX inverting enable
Onboard Parallel Port
Onboard Paraller Mode
X ECP Mode Use DMA
X Parallel Port EPP Type
: Move Enter :Select +/-/PU/PD :Value F10 :Save ESC :Exit F1 :General Help
F5 :Previous Values
OnChip IDE Control
The chipset contains a PCI IDE interface with support for two IDE channels.
Select "Enabled" to activate the first and/or second IDE interface. Select
"Disabled" to deactivate an interface, if you install a primary and/or secondary
add-in IDE interface. If you highlight the literal "Press Enter" next to the "Onchip
IDE Control" label and then press the enter key, it will take you a submenu with
the following options:
OnChip IDE Channel 0
The chipset contains a PCI IDE interface with support for two IDE
channels. Select Enabled to activate the primary IDE interface. Select
Disabled to deactivate this interface.
Integrated Peripherals
Press Enter
Press Enter
PCI Slot
Enabled
3F8/IRQ4
2F8/IRQ3
Standard
Half
No,Yes
378 / IRQ7
Normal
3
EPP1.9
F6 :Fail-Safe Defaults F7 : Optimized Defaults
2-16
BIOS Setup
Item Help
Menu Level