Frequency / Clock Control - Biostar BVK2A Manual

Chapter2

2.9 Frequency / Clock Control

Figure 9. Frequency / Clock Control

CMOS Setup Utility-Copyright (C ) 1984-2000 Award Software
Auto Detect DIMM / PCI CLK
CPU Host/PCI/Spread Spec.
: Move Enter :Select +/-/PU/PD :Value F10 :Save ESC :Exit F1 :General Help
F5 :Previous Values
Auto Detect DIMM / PCI CLK
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The Choices: Enabled (default), Disabled.
CPU Host / PCI / Spread Spec.
This item allows you to select CPU Host Clock (CPU / PCI).
If unfortunately, the system's frequency that you are selected is not
functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as
"ON" status. All the CMOS data will be loaded as defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen
showed. This action will boot-up the system according to FSB of
the processor.
Frequency / Clock Control
Enabled
Default
F6 :Fail-Safe Defaults F7 : Optimized Defaults
2-32
BIOS Setup
Item Help
Menu Level