Error Message Chart - Canon B1 User Manual

Error Message Chart

Follow the suggested procedure for the error indicated on the host machine (printer).
Cause of Error
The top cover is open.
*1
The conveyor is full.
The trim box is full.
A booklet jam has occurred at the
two-knife trim section.
entrance of the
A booklet jam has occurred
knife trim section.
A booklet jam has occurred at the exit of
two-knife trim section.
the
*1
If this error message appears when the conveyor is not full, trim may be blocking the sensor.
E
3
Close the top cover
E handle and remove the booklets from the con-
Lift the
veyor.
Empty it. If there is trim left in the delivery chute, remove
the trim.
Open the delivery section cover
mer and the top cover
mer-B1. Open the
remove the jammed booklet. Reposition the
F2 transport unit and close the top cover
delivery section cover
in the two-
Open the top cover
B1. Open the
jammed booklet. Reposition the
close the top cover
Open the top cover
B1. Open the
jammed booklet. If necessary, also hold the
and lift the conveyor. Reposition the
port unit and close the top cover
F2
1
2
Remedy
1 .
2 of the upstream trim-
of the two-knife booklet trim-
1
A and F2 transport unit, and
2 to restart the printing.
of the two-knife booklet trimmer-
1
F2 transport unit and remove the
F2 transport unit and
1 to restart the printing.
of the two-knife booklet trimmer-
1
F2 transport unit and remove the
E and
1 to restart the printing.
Error Messages
A
A and
1 and the
E handle
F2 trans-
3-3