Specifications - Canon B1 User Manual

Specifications

Specifications
Product Name
Description of Product
Maximum number of sheets
1 2
trimmable * *
3
Possible trim size *
Possible trim width
Trim Box Capacity
4
Conveyor Capacity *
Machine Dimensions
Weight
Installation Space with Host Machine
Voltage
Power Consumption
Noise Level
Environmental Temperature
in Use
Temperature
in Storage
Temperature
in Transportation
Humidity
Pressure
Contamination
Level
1
* If the cover sheet is thinner than the other sheets in the booklet, the cover sheet may be scratched. It is
recommended to use a thicker sheet for the cover sheet.
2
* The maximum number of sheets trimmable can change depending on the connected host machine.
3
* The possible trim size can change depending on the connected host machine.
4
* When the delivery tray is removed, the conveyor full condition is not detected, and continuous operation is
possible.
4-2 Specifi cations
Two-Knife Booklet Trimmer-B1
Upper knife reciprocating top-bottom trimmer
50 sheets (80 gsm),
48 sheets (80 gsm) + 2 sheets (300 gsm)
A3, B4, A4R, 13ʺ x 19.2ʺ (330.2 mm x 487.7 mm), 12ʺ x 18ʺ,
11ʺ x 17ʺ, LGL, LTRR, 12.60ʺ x 17.72ʺ (320 mm x 450 mm [SRA3])
(Above sizes are native sheet sizes before half folded.)
Top-bottom: 2 to 15 mm (0.08" to 0.59")
Normally the top-bottom length after trimming should be 190 mm
(7.48") or larger.
Approximately Trimmed strip from 1,500 sheets (width 15 mm
[0.59ʺ], A4, 80 gsm, approximately 750 sheets on top and bot-
tom respectively)
30 booklets (40 sheets of A4 booklet, 80 gsm, when trimming
20mm [0.79ʺ] of width in Booklet Trimmer)
536 (W) x 770 (D) x 1,040 (H) mm (21 1/8ʺ x 30 3/8ʺ x 41ʺ)
(Without conveyor section and delivery tray)
Approximately 145 kg (319 lb)
(Without conveyor section and delivery tray)
Installation space differs depending on the connected host machine.
Refer to the ʺMachine Dimensionʺ described on the manual of the
host machine, and this machine.
120-127V AC, 50/60Hz, 4A
440 W or less
70 dBA or less
Compliant with the specification of the host machine (printer)
-10 to 40°C (14 to 104°F)
-10 to 50°C (14 to 122°F)
Compliant with the specification of the host machine (printer)
608 to 1,013 hPa (18 to 30 in Hg)
Pollution Degree 2 (Office environment)