12
www.electrolux.com
start and stop a drying program remotely
by activate remote start.
The Remote Control
activates automatically when
you press the Start/Pause
button to start the program,
but it is also possible to start
a drying program.
Activate Remote Start
Press the
The indicators
display. Now it is possible to start the
program remotely.
Deactivate Remote Start
Press the
The
icon is off and the remote start is
deactivated.
If the door is open, the
Remote Start is
deactivated.
7. PROGRAM TABLE
Program
Favourite
Cottons
Mixed +
Bedding +
Energy Saver
Refresh
Remote button.
appears on the
Remote touch button.
Load
The load
depends
on a mem‐
orised pro‐
gram
8,0 kg
6 kg
4,5 kg
3)
8,0 kg
1kg
Over-the-air update
WARNING!
During the update it is highly
recommended to not turn off
or unplug the appliance.
The App may propose an update for
downloading new features.
The update is accepted via App only.
If a program is running, the App notifies
that the update will start at the end of the
program.
During the update, the appliance shows
in the display.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
1)
Properties / Fabric type
You can do your configuration of program and
options and memorise in the appliance mem‐
ory (See chapter "
Cotton fabrics.
Mix of garments made of cotton,
cotton-synthetic blend and syn‐
thetic fabric.
Up to three bed linen sets, one
of which can be double size.
Cycle to be used to dry cotton
with "cotton cupboard" dryness
level, with maximum energy sav‐
ing.
Refreshing textiles that were in storage.
2)
Settings - Favourite
/
/
/
/
").