HP Kayak XU03 User Manual page 6

Pc workstations
Hide thumbs Also See for Kayak XU03:
Table of Contents

Advertisement

Component
XA-s (Minitower models)
SCSI
None
Connectors
All models are equipped with a
Matrox Productiva G100 AGP
graphics controller board. There is a
total of
8 MB SDRAM
Video
which cannot be upgraded.
Controllers
All models have 6 slots: 1 AGP, 3 PCI, 1 ISA, 1 combination ISA/PC. Support for WOL
1 AGP slot used for the Video
Accessory
Adapter.
Board Slots
Note: The XA-s are not delivered with an
installed LAN board.
Communications
CD-ROM Drive
Audio
Hardware monitoring utility that monitors system components (for example: if you are unable to get the system and
HP MaxiLife
Utility (available
on all models)
Power Supply
1.
The series type (0301 or 0303) is marked on the Support label, found on the back of the workstation (right or left-hand side of the box).
Refer to
page 27
for more information about identifying a video board on an HP Kayak XU PC Workstation.
2.
WOL = Wake On LAN
HP Kayak PC Workstation Overview
of installed memory
All models have 2 USB (A, B) connectors, 2 serial ports, 1 parallel port
All models include a
All models have an integrated 16-bit hi-fi audio processor with music synthesizer and mixer
display working properly). When an error is detected it is displayed on the dedicated LCD located on the
Input voltage:
Input frequency:
Maximum output power:
6
XU (Series 0301 and 0303)
For SCSI models only.
Ultra-Wide 16-bit internal SCSI connector for both external and internal drives
(up to 40 MB per second), plus two internal narrow SCSI connectors.
Subsystem with HP FastRAID Port.
XU Series 0301 models are equipped
®
with a Matrox
Millennium II AGP
graphics controller board. There is
8 MB of installed WRAM which can
be upgraded to 12 or 16 MB.
XU Series 0303 models are equipped
®
with a Matrox
Millennium II G200
graphics controller board. There is
8 MB of installed SGRAM which can
be upgraded to 12 or 16 MB.
I PCI slot used for the LAN/Ultra-Wide SCSI board with RPO capability.
1 AGP slot used for the Video Adapter.
1 RAID/PCI slot. Some models are equipped with the Adaptec
ARO-1130 PCI RAIDport
adapter new generation (FastRAID2).
32X speed IDE CD-ROM
front panel.
100-127, 200-240V ~
45/66Hz
260W continuous
1
XW (Series U3 and W3)
XW Series U3 models are equipped
with an AccelEclipse II AGP graphics
controller board. There is 32 MB of
installed video memory (not
upgradeable).
XW Series W3 models are equipped
with an HP VISUALIZE Fx4 graphics
controller board. There is 18 MB of
installed video memory. The Texture
module upgrade supplies 16 MB of
additional texture memory.
2
compatible LAN boards.
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents