Setting Up And Troubleshooting - HP Kayak XA Online Manual

Setting Up and Troubleshooting

Your keyboard, operating system settings, and sequencer program must all be set
up correctly so that you can record and play back music satisfactorily.
It's difficult to give precise instructions here for setting up, as the steps depend on
your keyboard and on the music software you are running. For more specific
instructions, refer to the documentation that came with your keyboard and
software. Here are some general guidelines, however, that should help you get
started and solve some of the most common problems.
1 Connect your keyboard instrument to the rear panel of your PC via a MIDI cable,
2 Direct your computer's MIDI output to a playback device as follows:
Troubleshooting
If you are running Windows 95 or Windows NT 4.0:
Under Windows 95
and Windows NT 4.0
as shown on page 18.
a Click the Start button.
b Select Settings Control Panel.
c Double-click the Multimedia icon
d In the Multimedia Properties dialog box, click the MIDI tab.
•
To play back all the channels through the same synthesizer, select Single
instrument.
If you are running Windows 95, select either
(to play back through the computer's sound board) or
Synthesis
MPU-401 Device
If you are running Windows NT 4.0, select either
through the computer's sound board) or
your keyboard instrument).
.
(to play back through your keyboard instrument).
Using Sound on Your PC
Connecting a MIDI Keyboard
Internal OPL2/OPL3 FM
(to play back
FM Synth
(to play back through
Midi Out
HP
English 19