HP Kayak XA Online Manual page 29

CAUTION As many applications are designed to work with your sound board's default settings,
you are advised not to change the board's settings unless you are very familiar with
PC configuration.
5 To change a setting, first change Auto-Configuration to
6 Click OK again at the Properties window, and then click Yes at the confirmation
7 Click OK at the Multimedia Properties window. If you changed any settings,
Viewing the Software
You can view and change the sound board's software settings, as follows:
Settings Under
1 Open the Control Panel from the Main program group.
Windows NT 3.51
2 Double-click the Drivers icon.
3 In the Installed Drivers list, select
4 The 16-bit Audio Board Setup window appears. If you changed any settings, click
Viewing the Software
You can view or change the sound board settings using the ICU program, as follows:
Settings Under
1 Open the Plug and Play program group.
Windows 3.11
2 Double-click the ISA Configuration Utility icon.
3 In the ISA Configuration Utility window, select
4 If you clicked Modify to change the settings, select Audio and then click Settings
If you experience a problem with the ICU program when trying to change the sound
board settings, it could be due to the version of your BIOS. Call HP Support for
assistance—the most recent version of the BIOS is available on the HP World Wide
Web.
Now you can view the settings. You may need to scroll the list to see all of the
settings.
new setting using the scroll buttons and click OK.
message (but please read the message first!).
restart your PC for the changes to take effect.
OK and restart your PC for the changes to take effect.
click View or Modify.
to make your changes.
Disable
16-bit Audio Driver,
AZT1008 PnP Sound Device
Using Sound on Your PC
Sound Board Settings
. Then select a
then click Setup.
and
English 29