Panasonic KX-FP207FX-S Service Manual page 164

KX-FP207FX-S/FP218FX-S
15.1.2.1. Maintenance List
No. OPERATION
1 Document Path
2 Rollers
3 Platen Roller
4 Thermal Head
5 Sensors
6 Glass
7 Abnormal, wear and tear
or loose parts
15.1.2.2. Maintenance Cycle
No. Item
1
Separation Roller (Ref. No. 145)*
2 Separation Rubber (Ref. No. 13)
3 Feed Rollers (Ref. No. 11, 56, 94)
4 Thermal Head (Ref. No. 40)
5 Platen Roller (Ref. No. 90)
6 Pickup Roller (Ref. No. 96)
Note:
1
* These values are standard and may vary depending on usage conditions.
2
* Refer to Cabinet, Mechanical and Electrical Parts Location (P.211).
CHECK
Remove any foreign matter such as paper.
If the roller is dirty, clean it with a damp cloth then dry thor-
oughly.
If the platen is dirty, clean it with a damp cloth then dry
thoroughly. Remove the paper and film cartridge before
cleaning.
If the thermal head is dirty, clean the printing surface with a
cloth moistened with denatured alcohol (alcohol without
water), then dry thoroughly.
Document top sensor (SW351), Document set sensor
(SW352), Cover open sensor (SW1001), Paper top sensor
(SW1001), Film detection sensor (SW1002), Film end sen-
sor (SW1003) . Confirm the operation of the sensors.
If the glass is dirty, clean them with a dry soft cloth.
Replace the part. Check if the screws are tight on all parts.
Cleaning Cycle
2 3 months
3 months
3 months
3 months
3 months
3 months
Cycle
1 (31,500 documents) Refer to How to Remove the Gear Block and
7 years*
7 years (31,500 documents) Refer to Document feeder/recording paper
7 years (31,500 documents) Refer to Disassembly and Assembly Instruc-
7 years (31,500 documents) Refer to How to Remove the Thermal Head
7 years (31,500 documents) Refer to How to Remove the Platen Roller and
7 years (31,500 documents) Refer to How to Remove the Pickup Roller
164
REMARKS
—
Refer to Document feeder/recording paper
feeder/scanner glass cleaning (P.174).
—
Refer to Thermal Head Cleaning (P.175).
See Maintenance Check Items/Component
Locations (P.163) and How to Remove the P.C.
Boards and Speaker (P.144).
Refer to Document feeder/recording paper
feeder/scanner glass cleaning (P.174).
—
Replacement
Procedure
Separation Roller (P.146).
feeder/scanner glass cleaning (P.174).
tions (P.137).
(P.141).
Lock Lever (P.151).
(P.153).