Specifications - Hyundai PR 809 PLLSU Instruction Manual

CLOCK AND ALARM OPERATION
SETTING ThE CLOCK
Make sure the POWER switch is set to the 'Off' position. The time or alarm time cannot be set
or adjusted while the unit is 'On'.
Press the PROG/CLK/RAN button and the display will show the 12/24 H: 24:00 and 24 will
flash, then press Skip +/- to select 12 or 24 hours.
Press the PROG/CLK/RAN button again to confirm setting, then the Display will show 00:00
and the first 00 will flash, then press Skip +/- to select the correct hours.
Press the PROG/CLK/RAN button to confirm the hour setting, then the minute 00 will flash and
press Skip +/- to select the minute.
Press the PROG/CLK/RAN button to confirm the minute setting.
ALARM SETTING
• Press the Alarm button and select the Hour to correct Hour
• Press the Alarm button again to select the correct Minute.
• Press the Alarm button again to select alarm in which mode
• After set the alarm time and press the Alarm On/Off button.
• Press the Alarm off button to cancel the Alarm
SNOOzE / SLEEP
SLEEP FUNCTION
• Press the Sleep Button and the display will show 90, press again is 80/70/60/50.....10, then
press again is off.
• After set the Sleep function and when finish, then the unit will off atomically.
SNOOzE
The alarm can be temporarily turned off manually by pressing the SNOOZE button; the alarm
will turn back on 5 minutes later automatically. This feature can be repeated endlessly.
STOP / MODE / BAND BUTTON
In Tuner Mode: Select the Band: AM or FM
In USB/SD Mode: Press once is Stop function, Press again is Stop and the display will show
the total track, Press again and change to USB or SD/MMC mode.

SPECIFICATIONS

• Mains supply:
• Radio bands:
• Frequency range:
• Speakers:
• Output power:
• Headphone impedance:
we reserve the right to change technical specifications.
230V AC - 50Hz
AM, FM (stereo)
FM 88 – 108MHz
AM 540 – 1600kHz
4 ohms 3-5W x 2
1 x 2W RMS, 10% THD
32 ohms
EN - 24