Removing The Computer Access Panel - Compaq Evo D310 MT Hardware Reference Manual

Hardware Upgrades

Removing the Computer Access Panel

2–2
1. Open the computer by removing its outside cover. See the
procedures for removing the computer access panel.
2. Install any optional equipment. See the applicable sections of this
guide or the documentation provided with the optional equipment
for instructions.
3. Replace the computer access panel.
4. Turn on the monitor, computer, and any devices you want to test.
5. Reconfigure the computer, if necessary. Refer to the
Computer Setup (F10) Utility Guide for instructions about using
Computer Setup.
To remove the computer access panel:
1. Shut down the operating system properly, then power off the
computer and any external devices.
2. Disconnect the power cord from the power outlet, and disconnect
any external devices.
Hardware Reference Guide