Removing the Computer Access Panel
1. Turn the computer and all external devices off. Disconnect the
2. Disconnect the keyboard, monitor, and any other external
3. Remove the screws that secure the access panel to the computer
4. Slide the access panel back about 1 inch (2.5 cm); then lift it up
Removing the Computer Access Panel
power cord from the wall outlet.
CAUTION: When the unit is plugged in, the power supply always
has 5V applied to the system board even when the unit is turned
off. Failure to disconnect the power cord can result in damage to
the system.
equipment that is connected to the computer.
CAUTION: Before removing the computer access panel, verify that
the computer is turned off and that all power cord(s) are
disconnected from the electrical outlets.
chassis, as shown in the following figure.
and off the unit.
User's Guide 4–3