Switch Off The Device; Maintenance - THERAGUN Halo User Manual

Voltage(+/ - 10%)
Maximum Output Current
Pulse Width
Frequency
Net Charge
Maximum Current Density
Maximum Power Density
For LEDs therapy
Power of light
Red light: 94± 5 mW/cm2
Bule light: 65± 5 mW/cm2
(mW//cm2)
Red/IR: 94± 5 / 55± 5 mW/cm2
Red light: 645 nm
SHORT WAVELENGTH
Bule light: 411 nm
BOUNDARY
IR: 815 nm
Before using the LED ring, please check it for normal
A statement is required that
operation.
the output of the product is
The main device of the product is started up, making it enter
checked before each start
the three kinds of light working position. When the LEDs are
up for treatment and that
observed by visual observation, the outputs of light are judged
the method of checking is
to be norma
included
For Vibration mode:
Vibration 1750, 2100 and 2400 rpm
Frequency 1750rpm :29.1Hz 2100rpm:35Hz 2400rpm:40Hz

4.1 Switch off the device

Press the ON/OFF Button again to switch the device off and all the indicator lights
will be off.

5.0 Maintenance

The following maintenance instructions are important to ensure that your device
continues to work as it was designed. Failure to follow these instructions may cause
your device to stop delivering the required dose or to stop working altogether.
34
User Manual
1.0V @ 2k Ohm
5 00 uA @ 2k Ohm
On 60ms / Off 60ms
8. 3 Hz
Ω
0uC@ 500
0.2mA/cm² @500Ω
23.1uW/cm² @500Ω
Commented [I9]: Updated