Table of Contents
Advertisement
Document Name
User manual
Model
Theragun halo
spot" free illumination. The output is pre-tuned to one wavelength with a narrow spectral bandwidth.
The output wavelength of Red is 633±10 at 73 +/-5mW. During the treatment, the user holds the
device and place treatment head to the periorbital area.
In Blue light irradiation mode, the device utilizes Light Emitting Diodes to provide blue LED light to the
face. The blue light output is a visible light source of high spectral purity. They provide uniform or "hot-
spot" free illumination to face skin. The output is pre-tuned to one wavelength with a narrow spectral
bandwidth. The output wavelength of blue is 415 ±10nm at 50+-5 mW. During the treatment, the user
holds the device and place treatment head to the target treatment area with mild or moderate acne.
In Red+Near-infrared mode is intended for use in the treatment of facial wrinkles，The output
wavelength of Red+IR:633 ± 10nm/830nm±10nm at 73+/-5 and 55+/-5. During the treatment,
Indicated to emit energy in the red and IR region of the spectrum for use in dermatology for the
treatment of periorbital wrinkles.
3.1
Detachable component
QTY
Detachable
component
LED Ring
1
Micro
1
current
Document No.
TG
Rev
List
Materials
Polycarbonate
Polycarbonate+
Steel
-
HALO
-
003
4 0
Figure
11
Commented [TP3]: Conductive gel was mentioned above.
Should be included in the accessory list.
Commented [4R3]: Revised： User can buy the
conductive gel individually which are legally sold, to
reduce the impedance between the skin and the
stimulating device
Commented [JS5R3]: Confirm that we can include the
MC ring but not the MC gel?
Advertisement
Table of Contents
