Function Introduction; How To Operate The Theragun Halo - THERAGUN Halo User Manual

Document Name User manual Document No. TG - HALO - 003
Model Theragun halo Rev 4 0

3.2 Function Introduction

Vibration Mode:
This mode with 3 vibration levels (1750, 2100 and 2400 rpm) are intended used for to relax facial
muscles
LED photo-therapy Mode:
Red light and blue light functional ,and Red +IR mode:
The red light wavelength is 633±10nm and it is intended for the treatment of periorbital wrinkles.
The blue light wavelength is 415±10nm and is for the treatment of mild to moderate acne.
Red +IR wavelength is 633 ± 10nm /830nm±10nm
Choose the red or blue light irradiation or red +IR mode
Micro Current stimulation mode:
There are 3 steps of micro current output intensity, intended for facial stimulation and is indicated for
over-the-counter aesthetic use.
For the facial stimulation model, the output intensity is gradually increased from the minimum output
intensity to obtain a most suitable output intensity.
The user can choose the suitable treatment parameters according to their symptom severity.

3.3 How to Operate the Theragun halo

Using the Theragun halo
Start by washing your face completely and rinse twice to remove all
residue. Allow skin to dry completely before starting treatment.
13