Snom M500 Quick Installation Manual page 15

Facility with network infrastructure
Connecting the base station
The base station can be operated with Power over Ethernet (PoE) provided via the network
cable or, if PoE is not available in your network, with the separately available 5V DC power
adapter.
Plug the Ethernet (network) cable into the RJ45 connector labeled "NET", and plug the other
end into the network side to establish a data link. If PoE is not available, insert the plug of
the power supply into the connector labeled "5V DC" and hook up the plug to the wall outlet.
The second RJ45 connector, labeled "MULTI-CELL", is for daisy-chaining further M500 base
stations without the need for a second Ethernet connection line. Up to six M500 base
stations can be connected for single cell or multi-cell operation.
IMPORTANT INFORMATION
1. Use only a compatible Snom power adapter (model number NBS12E050200UV).
To order a replacement power adapter, visit our website at
2. The power adapter is intended to be correctly oriented in a vertical or floor mount
position. The prongs are not designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
www.snomamericas.com
15
.