Table of Contents Chapter 1 Legal, Regulatory, and Safety Copyright, Disclaimer and Trademarks ..........1-1 Regulatory Information ................. 1-2 Video Standard Notice ................ 1-10 OpenSSL Toolkit License Issues ............1-10 FreeType License Issues ..............1-12 ENERGY STAR® Program ..............1-16 Disposing of the computer and the computer's battery ....
Page 3
Smart Card ................... 4-16 Wireless WAN device ................4-17 GPS Function ..................4-18 HDMI™ out port ................... 4-19 USB Type-C™ Adapters ..............4-20 Wireless display .................. 4-27 Security lock ..................4-27 Optional Accessories ................4-28 Sound System and Video mode ............4-29 Chapter 5 Utilities and Advanced Usage Utilities and Applications ..............
Only peripherals complying with the FCC class B limits can be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by Dynabook is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s Universal Serial Bus (USB 3.1) port, Thunderbolt™...
Page 6
USB Type-C™ port and HDMI™ out port. Changes or modifications made to this equipment, not expressly approved by Dynabook or parties authorized by Dynabook could void the user’s authority to operate the equipment. FCC conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.
Page 7
EMC (Electromagnetic Compatibility) standards. However, Dynabook cannot guarantee that this product still observes these EMC standards if options or cables not produced by Dynabook are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards.
Page 8
Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by Dynabook could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Page 9
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Page 10
Following information is only valid for EU-member States: Information requirements Regulation EC 1275/2008 Additional information as required by Regulation (EC) 1275/2008 amended by Regulation (EU) 801/2013 implementing European Eco-Design Directive with regard to requirements for standby, off mode and networked standby electric power consumption of electrical and electronic household and office equipment can be found here:...
Page 11
Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Dynabook will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.
Page 12
Dynabook meets all requirements of Turkish regulation 28300 “Restriction of the use of certain hazardous substances in electrical and electronic equipment”.
Video Standard Notice THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO") AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH...
Page 14
Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit"...
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
Page 16
Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction ============ The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license.
Page 17
authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project', be they named as alpha, beta or final release. `You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the project's source code as well as linking it to form a `program' or `executable'.
Page 18
-------------- Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project', `FreeType Engine', `FreeType library', or `FreeType Distribution'.
If the model you purchased is compliant, it uses the ENERGY STAR logo and the following information applies. Dynabook is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency. Your computer...
Page 20
observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the following general precautions and to note the cautions included in the text of the manual. Provide adequate ventilation Always make sure that your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep Mode).
Page 21
Heat injury Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.
Make sure all disk/disc activity has ended before moving the computer. Turn off (shut down) the computer. Disconnect the AC adaptor and all peripherals before moving the computer. Close the display panel. Do not pick up the computer by its display panel. Before carrying your computer, shut it down, disconnect the AC adaptor and allow it to cool down.
Page 23
A caution informs you that improper use of equipment or failure to follow instructions might cause data loss, equipment damage, or might result in minor or moderate injury. Please read. A note is a hint or advice that helps you make best use of your equipment.
This chapter provides an equipment checklist, and basic information to start using your computer. If you use an operating system that was not pre-installed by Dynabook, some of the features described in this manual might not function properly. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
Click Tap the Touch Pad or click the left Touch Pad control button once. Left-click the mouse once. Tap the touch screen once (only for touch screen models). Right-click Click the right Touch Pad control button once. Right-click the mouse once. Press and hold on the touch screen (only for touch screen models).
Page 26
It is recommended to use the AC adaptor that was included with your computer, or use AC adaptors specified by Dynabook to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor might cause fire or damage to the computer possibly resulting in serious injury.
Page 27
Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions. Connect the power cord to the AC adaptor. Figure 2-1 Connecting the power cord to the AC adaptor (2-pin plug) Figure 2-2 Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord is included with the computer depending on the model.
Page 28
Opening the display The display panel can be opened to a wide range of angles for optimal viewing. To open the display panel, slowly lift it with one hand holding the center of the display panel (as shown in the following figure) and the other hand holding the palm rest down so that the main body of the computer is not raised.
Page 29
Turning on the power This section describes how to turn on the power. The Power indicator indicates the status. Refer to the Power Condition Descriptions section for more information. After you turn on the power for the first time, do not turn it off until you have set up the operating system.
When it is displayed, be sure to read the license terms and license agreement carefully. Getting to know Windows For detailed information on what is new and how to operate Windows, refer to Tips in the Start menu. Start menu The Start menu is the launching pad for everything you can do in the Windows operating system, providing easy ways to access your apps, programs, websites and other important information.
Page 31
Action Center You can review important notifications from apps or Windows in Action Center, and take action without having to open apps. It also provides quick action buttons to access to most-used settings instantly. Select the Action Center icon on the Windows taskbar to view your notifications and quick actions.
It is highly recommended to use Windows Hello Face indoors. Operating outdoors might cause enrollment/sign-in failure due to the possible sunlight affection. Tablet mode Tablet mode enables touch-optimized working environment without keyboard and Touch Pad. After switching to tablet mode, Start menu and apps are running in full screen, giving you more space to work in.
Page 33
To restart the computer, there are several ways this can be achieved: Click Start -> (Power) and then select Restart. Press CTRL, ALT, and DEL simultaneously (once) to display the menu window, and then select Restart by clicking the power icon ( in the lower-right corner.
Page 34
Benefits of Sleep Mode The Sleep Mode feature provides the following benefits: Restores the previous working environment more rapidly than the Hibernation Mode feature. Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode feature.
Page 35
Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits: Saves data to the internal storage drive when the computer automatically shuts down because of a low battery condition. You can return to your previous working environment immediately when you turn on the computer.
Media Restoring the pre-installed software from the Recovery Partition If you choose dynabook Maintenance Utility to erase the internal storage drive, all data including the operating system and recovery partition will be deleted. In that case, you cannot create recovery media or restore the pre- installed software from the recovery partition.
Page 37
Follow the on-screen instructions to finish creating the Recovery Media. dynabook Recovery Wizard option in dynabook Maintenance Utility will not exist if you restore the computer from the recovery media you created by recovery drive creating option in Windows system.
Page 38
(Power) and then select Restart. Hold down 0 (zero) key and then release this key just after the computer is power on. Select Troubleshoot -> dynabook Maintenance Utility -> dynabook Recovery Wizard. Follow the on-screen instructions to finish the recovery.
Chapter 3 The Grand Tour This chapter identifies the various components of the computer. It is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, refer to the Legal Footnotes section.
Power indicator The Power indicator normally glows white when the computer is turned on. Left side The following figures show the left side of the computer. Figure 3-2 The left side of the computer 1. Security lock slot 3. Headphone/Microphone jack 2.
Keep foreign metal objects, such as screws, staples, and paper clips, out of the USB port. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Headphone/ A 3.5 mm mini headphone/microphone jack Microphone jack enables connection of a monaural microphone, stereo headphones, or a headset.
It is recommended to use the AC adaptor that was included with your computer, or use AC adaptors specified by Dynabook. Use of an incompatible AC adaptor might cause fire or damage to the computer possibly resulting in serious injury.
Do not block the cooling vents. Keep foreign metal objects, such as screws, staples, and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Carefully clean the dust on the surface of the cooling vents using a soft cloth.
Front with the display open (PORTEGE X30-F/ TECRA X40-F) This section shows the computer with the display panel open. In order to open the display, lift up the display panel and position it at a comfortable viewing angle for you. Figure 3-6 The front of the computer with the display panel open 1.
Page 45
It is highly recommended to use Windows Hello Face indoors. Operating outdoors might cause enrollment/sign-in failure due to the possible sunlight affection. Do not point the face recognition sensor directly at the sun. Do not touch or press strongly on the face recognition sensor lens and infrared LEDs.
Page 46
Legal Footnote (Wireless LAN) For more information regarding Wireless LAN, refer to the Legal Footnotes section. Display screen 33.8 cm (13.3") or 35.6 cm (14.0") LCD screen, is configured with one of the following resolutions depending on the model you purchased: HD, 1366 horizontal x 768 vertical pixels FHD, 1920 horizontal x 1080 vertical pixels Be aware that, when the computer is operating...
Touch Pad control The two buttons located on the bottom of the buttons Touch Pad are used like the buttons on a standard mouse. Press the left button to select a menu item or to manipulate text or graphics designated by the mouse pointer, and press the right button to display a menu or other function depending on the software you are using.
Page 48
Figure 3-7 The front of the computer with the display panel open 1. Infrared LED* 10. Power button 2. Web Camera* 11. Power button ring LED 3. Web Camera Shutter* 12. Keyboard 4. Web Camera LED* 13. Touch Pad 5. Microphones* 14.
Page 49
Do not point the web camera directly at the sun. Do not touch or press strongly on the web camera lens and infrared LED. Failure to do so might reduce image quality, possibly resulting in recognizing faces incorrectly. Use an eyeglass cleaner (cleaner cloth) or other soft cloth to clean the lens and the LED if it becomes dirty.
Page 50
Display screen 39.6 cm (15.6") LCD screen, is configured with one of the following resolutions depending on the model you purchased: FHD, 1920 horizontal x 1080 vertical pixels UHD, 3840 horizontal x 2160 vertical pixels Be aware that, when the computer is operating on the AC adaptor, the image displayed on the internal screen is somewhat brighter than when it operates on battery power.
The actual specifications might vary depending on the model you purchased. The processor type varies depending on model. To check which type of processor is included in your model, click Start -> dynabook PC Information. Legal Footnote (CPU) For more information regarding CPU, refer to the Legal Footnotes section.
For more information regarding Internal Storage Drive Capacity, refer to the Legal Footnotes section. Video RAM The memory in the graphics adaptor of the computer, used to store the image displayed on a bitmap display. The amount of Video RAM available depends on the system memory of the computer.
Page 53
DC IN/Battery indicator Check the DC IN/Battery indicator to determine the status of the battery pack and the power status with the AC adaptor connected. The following indicator conditions should be noted: Flashing Amber The battery charge is low. The AC adaptor must be connected to recharge the battery.
Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that must be taken when using it. Using the Touch Screen Some models are equipped with a touch screen. You can use your finger to manipulate icons, buttons, menu items, the on- screen keyboard, and other items on the touch screen.
Swipe Quickly move your finger in from the edge of the screen, without pausing when you first touch it. Swipe from the left edge: views all your open apps in task view. Swipe from the right edge: opens the Action Center.
Two-Finger Scroll Place two fingers down and slide them vertically or horizontally from anywhere on the Touch Pad. This allows you to operate the scroll bars of a window. Three-Finger Tap Tap once on the Touch Pad with three fingers together to open Windows Search.
Page 57
The control buttons below the AccuPoint are used like the buttons on a standard mouse. Press the left button to select a menu item or to manipulate text or graphics designated by the pointer, and press the right button to display a menu or other function depending on the software you are using.
Figure 4-2 Removing the AccuPoint cap Product appearance depends on the model you purchased. Position a new cap on the peg. Be careful to let the peg inserted into the round groove inside the new cap and then press it into place. You can buy replacement AccuPoint caps from authorized dealer.
Page 59
Figure 4-3 CAPS LOCK indicator 1. CAPS LOCK indicator Product appearance depends on the model you purchased. CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format. Function Keys The function keys (F1 ~ F12) are the 12 keys at the top of your keyboard. Function keys let you enable or disable certain features of the computer.
Page 60
Some functions show the toast notification at the edges of the screen. Those toast notifications are enabled by default. You can disable them in dynabook Settings. To access it, click Start -> dynabook Settings -> Keyboard. Windows special keys The keyboard provides two keys that have special functions in Windows, ®...
This key activates the Windows Start menu. This key has the same function as the secondary (right) mouse button. Using the Fingerprint Sensor Some models are equipped with the fingerprint sensor for the purpose of enrolling and recognizing fingerprints. Lightly touch and rest your finger on the fingerprint sensor to recognize fingerprints.
Do not touch the sensor with a wet finger or any wet objects. Keep the sensor surface dry and free from water vapor. Do not touch the sensor with a soiled or dirty finger as minute foreign particles of dust and dirt might scratch it. Do not paste stickers or write on the sensor.
Page 63
If the RTC lasting time completely runs out, the system will lose this information and the real-time clock and calendar will stop working. You can change the Real-Time Clock settings in the dynabook Setup Utility. Refer to Real-Time Clock for further information.
Page 64
Battery type Power off Power on Battery pack about 3 hours about 3 ~ 10 hours (48 Wh) Be aware that the charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you are using the computer.
Page 65
Repeat these steps two or three times until the battery recovers normal capacity. Monitoring battery capacity Remaining battery power can be monitored using the following methods. Clicking the battery icon on the Windows Taskbar Via the Battery Status in the Windows Mobility Center window Wait several seconds to monitor the remaining operating time because the computer needs time to check the remaining capacity of the battery pack and then calculate the remaining operating time, based...
Battery pack exhausted time When you turn off the power of your computer with the battery pack fully charged, the battery pack exhaust within the following approximate period. Battery type Sleep Mode Shut Down Mode Battery pack about 6 ~ 7 about 45 days days (48 Wh)
Page 67
This Memory media slot supports the following memory media: microSD/SDHC/SDXC Card. Not all memory media have been tested and verified to work correctly. Therefore, it is not possible to guarantee that all memory media can operate properly. Figure 4-5 Examples of memory media (microSD card) Points to note about the memory media card microSD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or...
Page 68
The card is designed so that it can be inserted only one way. Do not try to force the card into the slot. Memory cards have a limited lifespan, so it is important to back up important data. Do not write to a card if the battery power is low. Low power might affect writing accuracy.
Removing memory media The following instructions apply to all types of supported media devices. To remove memory media, do the following: Click the Safely Remove Hardware and Eject Media icon on the Windows taskbar. Select the memory media that you want to remove. Push the memory media until you hear a click to partially release it.
Press the Smart Card gently to ensure a firm connection is made. When inserting a Smart Card into the Smart Card slot, make sure to confirm that the card is oriented correctly before inserting. Insert the Smart Card until it reaches the end of the Smart Card slot. The Smart Card is partially extended beyond the chassis edge.
Insert the SIM card tray into the SIM card slot, and push the center of the tray to close it. Press gently until it locks into place. Figure 4-7 Installing the SIM card Nano SIM 1. SIM card slot 3. SIM card tray 2.
information accuracy. Specifically, your current location might not be detected in the following places or situations: Inside or directly under a building Inside a bag or box Among dense trees When there is an obstacle (person or object) in the front of the antenna Underground tunnel, underground, or underwater Buildings, streets or residential areas...
Depending on the model you purchased, one of the following USB Type- C™ adapters might be provided. Always use the USB Type-C™ adapter that is included with your computer or dynabook accessories. Disconnect any devices and cables from the USB Type-C™ adapter when connecting/disconnecting the AC adaptor or the USB Type-C™...
Page 74
USB-C™ to Ethernet LAN Adapter This adapter provides: USB Type-C™ port (Power Delivery Charging) and LAN jack. 1. LAN jack 2. USB Type-C™ port (Power Delivery Charging) The USB Type-C™ port (Power Delivery Charging) on this adapter is used for connecting AC adaptor only. USB data transmission is not supported by this port.
Page 75
USB-C™ to HDMI™/VGA Travel Adapter This adapter provides: USB Type-C™ port (Power Delivery Charging), USB 3.0 port, HDMI™ out port, RGB monitor port, and LAN jack. 1. LAN jack 4. RGB monitor port 2. USB 3.0 port 5. USB Type-C™ port (Power Delivery Charging) 3.
Page 76
USB-C™ to VGA/LAN Adapter This adapter provides: USB Type-C™ port (Power Delivery Charging), RGB monitor port, and LAN jack. 1. RGB monitor port 3. USB Type-C™ port (Power Delivery Charging) 2. LAN jack The output resolution of RGB monitor port on this adapter is up to 1920x1200 @60Hz.
Page 77
Connect the USB Type-C™ adapter to one of the Thunderbolt™ 3/ USB Type-C™ ports on your computer. Figure 4-9 Connecting the AC adaptor via USB Type-C™ adapter USB Type-C™ adapter appearance varies depend on the model you purchased. RGB monitor port An external analog monitor can be connected to the RGB monitor port on the USB Type-C™...
Page 78
Figure 4-10 Connecting the RGB cable to the RGB monitor port 1. Thunderbolt™ 3/USB Type-C™ port 3. RGB monitor port 2. USB Type-C™ adapter 4. RGB cable USB Type-C™ adapter appearance varies depend on the model you purchased. When displaying desktop on an external RGB monitor, desktop is sometimes displayed on the center of the monitor with black bars around desktop (with small size).
Page 79
If you are using Fast Ethernet LAN (100 megabits per second, 100BASETX), be sure to connect with a CAT5 cable or higher. You cannot use a CAT3 cable. If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you can connect with a CAT3 or higher cable.
Wireless display Your computer might support wireless display, a wireless technology which ® utilizes Wi-Fi to allow the computer to be wirelessly connected to external displays including TVs as extended screens. With wireless display, documents, streamed/local media contents or other online contents can be shared wirelessly with others.
You can purchase different types of USB Type- Adapters C™ adapters as accessories from Dynabook. Please contact your reseller or dynabook dealer regarding which type is available in your region. Thunderbolt™ 3 Dock Thunderbolt™ 3 Dock is the docking station that enables you to connect your computer peripherals through one Thunderbolt™...
Sound System and Video mode This section describes some of the audio control functions. Volume Mixer The Volume Mixer utility lets you control the audio volume for playback of devices and applications under Windows. To launch the Volume Mixer utility, right-click on the speaker icon on the Windows Taskbar, and then select Open Volume Mixer from the sub menu.
Page 83
Speakers This tab allows you to set Main Volume, Sound Effects, Default Format and Speaker configuration. Click the Auto Test button at the bottom of this tab to confirm the internal speakers or the headphone sound is coming from the right direction.
Page 84
If you are running some applications (for example a 3D application or video playback), you might see some disturbance, flickering, or frame dropping on your screen. If that occurs, adjust the resolution of display, lowering it until the screen is displayed properly.
You might not have all the software listed in this section depending on the model you purchased. dynabook Settings dynabook Settings is the configuration management tool available through the Windows operating system. To run dynabook Settings, click Start -> dynabook Settings.
Page 86
Depending on the usage situation, the life cycle of the battery might not be extended properly. To access this utility, click Start -> dynabook Settings -> eco Utility. For details on eco Utility, click Please click here for more information before you use eco Utility in this tab to see the help file.
Page 87
When the Power Off and Charge function is enabled, USB bus power (DC5V) is supplied to compatible ports even when the computer is powered OFF. USB bus power (DC5V) is similarly supplied to the external devices which are connected to the compatible ports. However, some external devices cannot be charged solely by supplying USB bus power (DC5V).
Page 88
Charge Mode" is enabled, your computer can supply USB bus power (DC5V, 1.5A) to the compatible ports while the computer is turned on. To set System ON CDP Charge Mode, click Start -> dynabook Settings - > USB Charge. Enabled Rapid USB battery charge at maximum 1.5A...
Page 89
Passwords set by the System Password function are different from the Windows password. User Password To set a user password, click Start -> dynabook Settings -> System Password. User authentication may be required to validate user rights when using System Password to delete or change passwords.
Page 90
If you set a Supervisor Password, some functions might be restricted when a user logs on with the User Password. To set a Supervisor Password: Click Start -> dynabook Settings -> System Password. Then click the down arrow next to Advanced options to show the Supervisor Password settings.
Page 91
Options—Allows you to set options for sending data logs. dynabook Setup Utility dynabook Setup Utility is a BIOS setup utility that provides you a menu- based user interface so that you can easily view and change BIOS settings. To enter the dynabook Setup Utility, do the following: Save your work.
When you choose LCD + External Display under Power On Display option in dynabook Setup Utility while two or more external display devices are connected to your computer, the operating system will select the internal LCD and one of the external display devices to be used when the computer is started.
Page 93
System automatic This feature automatically shuts down the system Sleep/Hibernation into either Sleep Mode or Hibernation Mode when there is no input or hardware access for a Mode specified time. This can be specified in the Power Options. Power on password Two levels of password security, supervisor and user, are available to prevent unauthorized access to your computer.
Page 94
To protect against overheating, the processor is Heat dispersal equipped with an internal temperature sensor which activates a cooling fan or lowers the processing speed if the computer's internal temperature rises to a certain level. You are able to select whether to control this temperature by either turning on the fan first, then if necessary lowering the processor speed, or by lowering the processor speed first, then if necessary turning...
Chapter 6 Troubleshooting Dynabook has designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. You should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.
Page 96
Check all cables to ensure that they are correctly and firmly attached to the computer - loose cables can cause signal errors. Inspect all connecting cables for loose wires and all connectors for loose pins. Check that your disc media is correctly loaded Always try to make detailed notes of your observations and keep them in a permanent error log - this helps you to describe your problems to Technical Support.
Page 97
Hardware If you cannot find a software problem, you should then check the setup and configuration of your hardware. First run through the items in the preliminary checklist as described previously then, if you still cannot correct the problem, try to identify the source.
By holding down one of the following keys during startup, your computer can load the following advanced options. Advanced option dynabook Setup Utility Boot Menu 0 (zero) Recovery options If your computer starts to load the Operating System instead of desired advanced options, do the following: Click Start ->...
Page 99
Overheating power down If the processor's temperature reaches an unacceptably high level with either setting, the computer automatically shuts down to prevent any damage. In this instance, all unsaved data in memory is lost. Problem Procedure Computer shuts Leave the computer off until it reaches room down automatically.
Page 100
The lasting time of the Real-Time Clock (RTC) has and system date/ run out. You must set the date and time in the time are lost. dynabook Setup Utility by using the following steps: Launch the dynabook Setup Utility. Refer to the...
Page 101
Real-Time Clock (RTC) information might be cleared if the power is turned on by pressing the power button. You should set the system date/time manually in dynabook Setup Utility. If it still does not operate properly, you should contact your reseller or dealer.
Page 102
- if so remove it and try to start storage the computer again. If this has no effect, check the Boot Priority Options setting under Boot within the dynabook Setup Utility. Slow performance The files on the internal storage drive might be fragmented.
Page 103
Problem Procedure You cannot read a Check to ensure that the required file is actually on file the memory media card that is inserted into the computer. If you are still unable to resolve the problem, contact Technical Support. Pointing device If you are using a USB mouse, you should also refer to both the mouse section and the documentation supplied with your mouse.
Page 104
USB mouse Problem Procedure Mouse pointer does In this instance, the system might be busy. Try not respond to moving the mouse again after waiting a short mouse operation while. Remove the mouse from the computer and then reconnect it to a free USB port in order to ensure that it is firmly attached.
Page 105
Restart. Hold down the F2 key and then release this key just after the computer is power on to show the dynabook Setup Utility. Select Security -> BIOS Password -> Supervisor, and then register the Supervisor Password. (If the User Password has been registered, clear it first.)
Page 106
Power Off and Enable the Power Off and Charge function under Charge function. USB Charge within the dynabook Settings. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply might be stopped for safety reasons.
Page 107
Problem Procedure The "USB Wakeup When "System ON CDP Charge Mode" or "Power function" does not Off and Charge function" is enabled, the "USB work. WakeUp" function does not work for ports that support the Power Off and Charge function. In that case, use a USB port that does not have the Power Off and Charge function or change to disable both "System ON CDP Charge Mode"...
Page 108
Problem Procedure Monitor does not After confirming that the monitor's power switch is turn on on, check the connections to make sure that the power cord/adaptor is firmly connected to the monitor and to a working power outlet. No display Try adjusting the contrast and brightness controls on the external monitor.
Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub. Wireless LAN Problem Procedure Cannot access Make sure that the wireless communication Wireless LAN function of the computer is on. If problems persist, contact your LAN administrator.
Page 110
Before you call Some problems you experience might be related to software or the operating system so it is important that you investigate other sources of assistance first. Before contacting, try the following: Review troubleshooting sections in the documentation supplied with your software and/or peripheral devices.
Chapter 7 Appendix Specifications This section summarizes the technical specifications of the computer. Physical Dimensions The following physical dimensions do not include parts that extend beyond the main body. The physical dimensions vary depending on the model you purchased. Size Approximately 316 (w) x 227 (d) x 15.9 (h) millimeters Approximately 316 (w) x 227 (d) x 16.4 (h) millimeters Approximately 332 (w) x 228.9 (d) x 16.9 (h) millimeters...
Computer 5V ~ 20V DC AC Power Cord and Connectors The AC input plug of the power cord must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Wire size: Minimum 0.75 mm...
The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia, Europe, Middle-East, Africa, South Africa, Switzerland, Italy and China. United Kingdom, South Africa, Middle-East UL approved BS approved Australia Europe, Africa, South Africa, Middle-East AS approved Approved by the appropriate agency...
Page 114
Because wireless products operate within the guidelines found in radio frequency safety standards and recommendations, Dynabook believes wireless products are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Page 115
If this occurs, the outsider might illegally access your system, eavesdrop, or cause the loss or destruction of stored data. Dynabook is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications Compatibility IEEE 802.11 Standard for Wireless LANs...
Page 116
Radio Characteristics Radio Characteristics of Wireless LAN module might vary according to: Country/region where the product was purchased Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4 GHz and 5 GHz band, local radio regulations might impose a number of limitations to the use of wireless communication equipment.
Page 117
Authentication prevents access to critical data and makes it impossible to falsify the origin of a message. Encryption prevents eavesdropping and maintains link privacy. Worldwide operation ® The Bluetooth radio transmitter and receiver operate in the 2.4 GHz band, which is license-free and compatible with radio systems in most countries in the world.
Page 118
Russian Limited Using SRD (Short Range Device) with Federation: implementation FHSS (Frequency-Hopping Spread Spectrum) modulation. Maximum 2.5mW (4dBm) EIRP (Equivalent Isotropically Radiated Power) is permitted to use. Maximum 100mW (20dBm) EIRP is permitted to use with the following conditions: Permitted to use SRD for outdoor applications without restriction on installation height only for purposes of gathering telemetry...
Page 119
Using SRD with DSSS (Direct Sequence Spread Spectrum) and other than FHSS wideband modulation. Maximum EIRP density is 2mW/ MHz. Maximum100mW (20dBm) EIRP is permitted to use. Maximum EIRP density is 20mW/ MHz. Maximum 100mW (20dBm) EIRP is permitted to use with the following condition: It is permitted to use SRD for outdoor applications only for...
Page 120
Maximum Power Output (2400 - 2483.5 MHz) IEEE802.11 b/ Maximum 20dBm EIRP g/n mode / Bluetooth (2400 - 2483.5 MHz) BLE Maximum 10dBm EIRP (5150 - 5725 MHz) IEEE802.11 a/n/ Maximum 23dBm EIRP ac mode (5725 - 5850 MHz) IEEE802.11 a/n/ Maximum 14dBm EIRP ac mode Europe: model AX200NGW...
Page 121
reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Les dispositifs fonctionnant dans la bande 5.15-5.25GHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Page 122
Taiwan Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio frequency devices. Article 14 The low power radio-frequency devices shall not influence aircraft security and interfere legal communications;...
Page 123
Contact an authorized service provider if you have problems with interference caused by this product to Other Radio Stations. 2. Indication for Wireless LAN The indication shown below appears on this equipment. (1)(2) (3)(4) 2.4 : This equipment uses a frequency of 2.4 GHz. DS : This equipment uses DS-SS modulation.
HDD/SSD erasure, or file overwritten. First, you must do the following in the dynabook Setup Utility: Turn on the computer while pressing the F2 key. On the dynabook Setup Utility screen, change AMT Setup Prompt to Enabled.
Page 125
Select MEBx Exit, and press Y key. When the computer restarts, go to dynabook Setup Utility. On the dynabook Setup Utility screen, change AMT Setup Prompt to Disabled. Press the F10 key to save the settings, and press the Y key.
Page 126
AMT configurations and is not an error. Enabling the AMT function might cause the network LAN Enable/ Disable items to be no longer changeable in dynabook Setup Utility. Consult with your system administrator about details. AMT function cannot be operated using a USB-LAN adaptor.
When using the AMT function, you should connect to a network by Wireless LAN. Information about Intel ® Authenticate ® For Intel Authenticate, please refer to www.intel.com/authenticate or related Intel web site. Legal Footnotes Non-applicable Icons Certain computer chassis are designed to accommodate all possible configurations for an entire product series.
Page 128
Published battery life numbers are achieved on select models and configurations tested by Dynabook at the time of publication. Recharge time varies depending on usage. Battery might not charge while computer is consuming full power.
Maximum brightness is only available when operating in AC power mode. Screen dims when the computer is operated on battery power and you might not be able to increase the brightness of the screen. Graphics Processing Unit (GPU) Graphics processing unit (GPU) performance might vary depending on product model, design configuration, applications, power management settings and features utilized.
Page 130
CMOS: Complementary Metal-oxide Semiconductor CPU: Central Processing Unit Direct Current DDR: Double Data Rate DIMM: Dual Inline Memory Module DVD: Digital Versatile Disc DVD-R: Digital Versatile Disc-recordable DVD-RAM: Digital Versatile Disc-random Access Memory DVD-R DL: Digital Versatile Disc Recordable Dual Layer DVD-ROM: Digital Versatile Disc-read Only Memory DVD-RW:...
Page 131
OCR: Optical Character Recognition (Reader) Personal Computer PCI: Peripheral Component Interconnect PCMCIA: Personal Computer Memory Card International Association RAM: Random Access Memory RGB: Red, Green, and Blue RFI: Radio Frequency Interference ROM: Read-Only Memory RTC: Real-Time Clock S/P DIF: Sony/philips Digital Interface Format Secure Digital SDHC: Secure Digital High Capacity...
Index External monitor problems 6-14 AC adaptor additional 4-28 connecting 2-3 Graphics Processing Unit 3-14 Battery extending life 4-13 Hard disk drive monitoring capacity 4-12 automatic power off 5-8 real time clock 4-10 save mode 5-9 Bluetooth® 7-6 Keyboard function keys 4-6 Function keys F1...F12 4-6 problems 6-7 Cleaning the computer 1-18...
Page 133
Memory media slot 4-13 Sound system 6-13 Technical support 6-15 microSD/SDHC/SDXC Card Touch Pad 6-9 note 4-14 USB device 6-11 USB mouse 6-10 Moving the computer 1-18 Recovery hard disk drive 2-15 Password power on 5-9 Recovery Media 2-14 Starting the computer by password 5-6 Supervisor 5-6 user 5-5...
Page 134
Video mode 4-30 Video RAM 3-14 Web Camera 3-7, 3-10 Wireless communication 7-5 User's Manual Index-3...
Page 135
Instruction Manual for Safety and Comfort...
Page 136
Table of Contents Introduction ..................4 Safe Use of Product, Components and Accessories ............5 Power ....................5 Communication..................12 Main Unit .....................15 Systems/Peripherals................22 Computer User Comfort Recommendations .......27 Good Working Posture ................27 Viewing Recommendations ..............28 Using the product with an external keyboard, mouse or monitor ..28 Typing style..................29 Taking breaks and varying tasks............29 Mobile computing tips ................30...
Introduction All of the Safety Instructions contained in this Manual must be read carefully and must be fully understood before you attempt to use your product, in order to avoid potential hazards that could cause bodily injury, property damage, or damage the product. Not all components or functions introduced in this Manual will be provided with your product.
Power Safe Use of Product, Components and Accessories Power WARNING Handling of the battery Never attempt to dispose of a battery by burning or by throwing it into a ■ fire, and never allow exposure to a heating apparatus (e.g., microwave oven).
Page 140
Power WARNING Never allow a battery to become wet. A wet battery will overheat or ■ ignite causing rupture or fire, possibly resulting in death or serious injury. Never store a battery in an area of high humidity. This could cause a fire ■...
Page 141
Power WARNING Battery warning indicators Always immediately turn the power off and disconnect the power cable/ ■ cord plug from the plug socket and stop using the battery if you observe any of the following conditions: Offensive or unusual odor ■...
Page 142
Power WARNING Do not disassemble, modify, tamper with or repair your product Do not attempt to disassemble, modify, tamper with or repair product ■ (including AC adaptor). Disassembly, modification, tampering or repairing your product could cause fire or electric shock, possibly resulting in serious injury.
Page 143
Power WARNING Attaching the power cable/cord Always confirm that the power plug (and extension cable plug if used) ■ has been fully inserted into the socket, to ensure a secure electrical connection. Failure to do so may result in a fire or electric shock, possibly resulting in serious injury.
Page 144
Power WARNING Only use approved power cables/cords Always use or purchase power cables/cords that comply with the legal ■ voltage and frequency specifications and requirements in the country of use. Failure to do so could result in a fire or electric shock, possibly resulting in serious injury.
Page 145
Power NOTE Handling of the battery Never attempt to install batteries in reverse polarity. For more ■ information on batteries, please refer to your product User's Manual. Storing your product If you do not intend to use your product for a long period of time, ■...
Communication Communication WARNING Turn Wi-Fi , Bluetooth and Wireless WAN Functionalities off ® ™ for Cardiac Pacemakers Turn Wi-Fi, Bluetooth and Wireless WAN Functionalities off when near ■ a person who may have a cardiac pacemaker implant or other medical electric device.
Page 147
Communication Turn Wi-Fi or Bluetooth or Wireless WAN Functionalities off in aircraft Turn off the Wi-Fi or Bluetooth or Wireless WAN functionality in aircraft or ■ in places that generate or can generate radio interference. Radio waves can potentially affect them, causing an accident due to malfunction. Check if a car has adequate electromagnetic compatibility when using your product in a car When using your product in a car, check with the automobile dealer if...
Page 148
Communication Ensuring Wireless Network Security A wireless LAN can greatly enhance the flexibility of your LAN ■ configuration and operations. You can exchange data between products and other devices on the LAN without the restrictions inherent in cabling. Toshiba strongly recommends that you take appropriate steps to ensure that the proper security is in place whenever you use a wireless connection to protect your privacy and guard against identity and/or data theft.
Main Unit Main Unit WARNING Turning off your product where electronic devices are regulated or controlled When you have to turn off your product aboard an aircraft or in places ■ where electronic devices are regulated or controlled, always completely shut down your product.
Page 150
Main Unit WARNING Choking hazards Never leave small parts such as covers, small batteries, small memory ■ cards, caps and screws within the reach of infants or small children. Swallowing a small part may cause choking and suffocation resulting in death or serious injury.
Page 151
Main Unit WARNING Do not use liquid cleaners or aerosol cleaners Always turn off the power and unplug the product from the electrical ■ outlet before cleaning. The injected combustible gas produced by these types of cleaners may remain inside of your product. The electrostatic spark from the motor or contact point of switch may ignite the gas residue, which could result in an explosion, fire, or burn injury.
Page 152
Main Unit CAUTION Avoid placing your product on unstable surfaces Never place your product on a shaky table, uneven, tilted surface or ■ other unstable location. your product may fall, causing damage to your product or possibly injury. Depending on the direction and/or angle of tilt of your product, your product could automatically shut down to avoid overheating.
Page 153
Main Unit CAUTION Never place your product in a dusty location Do not expose your product to dusty environments. If dust gets inside ■ your product, it could cause a system failure, malfunction or loss of data. If dust contaminates your product, do not turn on the power. Take it to an authorized Toshiba service provider before you use it.
Page 154
Main Unit CAUTION Never place or drop heavy objects onto your product Never place a heavy object on your product and be careful not to drop a ■ heavy object onto your product. It could damage your product or cause system failure.
Page 155
Main Unit NOTE Product installation environment Always provide sufficient space around your product to ensure ■ adequate ventilation. Never cover or block the air vents. ■ Use your product at temperatures and humidity levels within the ■ recommended environmental ranges. These ranges may vary depending on the specific product model - please refer to your product documentation or Toshiba website for details.
Systems/Peripherals Systems/Peripherals DANGER Do not disassemble or repair your optical drive The product may contain a Optical Disk Drive (ODD), such as a CD- ■ ROM, CDR/W, DVD, Blu-ray Disc™ drive or similar which have built-in laser device. To prevent any risk of exposure to laser radiation, do not disable or open any ODD assembly for any reason.
Page 157
Systems/Peripherals CAUTION Connecting peripheral devices Always turn the power off before connecting a peripheral device that is ■ not approved for Hot Insertion. An electrical shock or system failure may result if the peripheral device is connected while the power is turned on.
Page 158
Systems/Peripherals CAUTION Replacing the memory module Turn off the power and disconnect the AC adaptor when installing or ■ replacing a memory module. If you use your product for an extended period of time, the memory ■ modules and the circuits located close to the memory modules will become hot.
Page 159
Systems/Peripherals CAUTION Periodic back up of stored data It is a good idea to periodically back up the internal hard disk or other ■ main storage device to external media. General storage media is not durable or stable over long periods of time and under certain conditions may result in data loss.
Page 160
Systems/Peripherals NOTE Anti-virus software Use a virus-check program and make sure it is updated regularly. ■ Use AC power when playing video of DVD/Blu-ray™ When playing video of DVD/Blu-ray™, always connect the AC adaptor ■ to a power plug socket or power source to ensure maximum performance.
Good Working Posture Computer User Comfort Recommendations Good Working Posture Adjust your chair height: your feet should be flat on the floor and the ■ bottom of your thighs should be evenly supported by the seat. If your feet cannot reach the floor, use a foot rest. Avoid pressure points behind the knee or under the thigh.
Viewing Recommendations Rest your eyes periodically by focusing on objects that are farther away. ■ Viewing Recommendations Some individuals may experience health-related complications when ■ exposed to certain images or flashing lights (for example when playing videos or games). Discontinue use and consult a physician if you experience any health-related complications.
Typing style / Taking breaks and varying tasks Typing style The top of the monitor should be at or slightly below eye level. A ■ monitor that is too high or too low can cause awkward head and neck postures and may lead to discomfort in the neck muscles. If you use bifocals you may need to lower the monitor.
Mobile computing tips Mobile computing tips / Transporting the product / Seeking additional help Mobile computing tips When using the product at airports, on airplanes or trains, or at ■ meetings, make sure that you take the time to consider the points just mentioned.
Check list Check list Is your chair comfortable - does it support your back and arms well? ❏ Are your feet flat on the ground? ❏ Is there adequate space under your desk for your legs? ❏ Are the keyboard and mouse at elbow level? ❏...
Need help?
Do you have a question about the POETEGE X30-F Series and is the answer not in the manual?
Questions and answers