Table of Contents
Advertisement
SuperServer 1029UX-LL1-S16/LL2-S16/LL3-S16 User's Manual
Onboard LAN(1-4) Option ROM
Use this to select firmware function to be loaded for onboard LAN(1-4). The options are
Disabled, PXE and iSCSI.
Onboard NVME1/NVME2/NVME3/NVME4 Option ROM
Select EFI to allow the user to boot the computer using an EFI (Expansible Firmware Interface)
device installed on the NVME connector specified by the user. Select Legacy to allow the
user to boot the computer using a legacy device installed on the NVME connector specified
by the user. The options are Disabled, Legacy and EFI.
Onboard Video Option ROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy and EFI.
Network Stack Configuration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Disabled and Enabled.
*If "Network Stack" is set to Enabled, the following items will display:
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE boot support. If this feature is disabled, it will not create
the Ipv4 PXE boot option. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable Ipv4 HTTP boot support. If this feature is disabled, it will not create
the Ipv4 HTTP boot option. The options are Disabled and Enabled.
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE boot support. If this feature is disabled, it will not create
the Ipv6 PXE boot option. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable Ipv6 HTTP boot support. If this feature is disabled, it will not create
the Ipv6 HTTP boot option. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this feature to select the wait time to press the <ESC> key to abort the PXE boot. The
default is 0.
92
Advertisement
Table of Contents
