Table of Contents
Advertisement
Hot Plug Capable (Available when the device is detected by the system)
Use this feature to enable hot plug support for PCIe root ports 3A~3D. The options
are Disable and Enable.
IIO-PCIE Express Global Options
PCI-E Completion Timeout Disable
Select Enable to enable PCI-E Completion Timeout support for electric tuning. The op-
tions are Yes, No, and Per-Port.
South Bridge
The following South Bridge information will display:
•
USB Module Version
•
USB Devices
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy support
if there are no legacy USB devices present. Select Disable to have all USB devices available
for EFI applications only. The options are Enabled, Disabled and Auto.
XHCI Hand-Off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The options are Enabled and Disabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which in turn, will provide complete
legacy USB keyboard support for the operating systems that do not support legacy USB
devices. The options are Disabled and Enabled.
PCIe PLL SSC
Use this feature to enable PCIE PLL spread spectrum clocking (SSC). The options are
Disable and Enable.
Server ME (Management Engine) Configuration
This feature displays the following General ME Configuration settings.
Operational Firmware Version
Backup Firmware Version
87
Chapter 6: BIOS
Advertisement
Table of Contents
