Troubleshooting - Electrolux EH7L4CN User Manual

Step 1
Turn off the oven. Wait until the
oven is cold.
Top lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a halogen, 230 V, 40 W, 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
12.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not heat
up.
The lamp does not work.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Before you replace the lamp:
Disconnect the oven from the
Check if...
The fuse is blown.
The lamp is burnt out.
Step 2
Put a cloth on the bottom of the cav‐
mains.
12.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not remove
the rating plate from the oven cavity.
.........................................
.........................................
.........................................
Step 3
ity.
ENGLISH 61