Advertisement
3
3 x 4
1. Insert Wooden Dowel (3) into the end of Bottom Trim Panel (G) and Under Top Slat (D).
2. Align the Wooden Dowels (3) in the end of Bottom Trim Panel (G) and Under Top Slat (D) with the holes in
the leg of Left Side Panel (B) and Right Side Panel (C) and slide into place. Secure the panels together with
Allen Bolt (9) using Allen Wrench (15).
3. Apply the Rubber Feet Sticker (18) to the bottom of each leg.
3
C
9
9
4
1. With assistance, carefully tip the assembled
panels upright.
2.Slide one of the Back Panel (F) into the
grooves of Left Side Panel (B), Right Side
Panel (C) and Bottom Panel (H).
3. Slide the Plastic Slat (J) onto the inserted
Back Panel (F).
4. Slide the other Back Panel (F) into the
grooves of Left Side Panel (B), Right Side
Panel (C) and Plastic Slat (J).
5
1 x 4
1. Insert Cam Bolt (1) into Top Panel (A), fully tighten.
2. Align the Cam Bolts in Top Panel (A) with the holes in the Left Side Panel (B) and Right Side Panel (C) and
lower into place.
3. Secure the Top Panel (A) to the side panels with Cam Locks (2).
4. Secure the Under Top Slat (D) to Top Panel (A) with Screw (8).
1
1
A
9 x 4
15 x 1
B
3
D
H
G
15
3
3 x 2
2 x 4
1
1
B
18 x 4
9
9
3
9
F
J
F
B
H
8 x 1
A
3
3
D
C
Page 6 of 8
B
C
C
2
A
2
2
2
D
C
B
18
F
J
F
Advertisement
