Subscribe to Our Youtube Channel
Related Manuals for real living ZS007R
Summary of Contents for real living ZS007R
- Page 1 RUSTIC 2 DRAWER DESK ASSEMBLY INSTRUCTION ITEM#: ZS007R/ZS007B/ZS007W SKU#: 810343918/810534674/810534673 Need help? We are here for you! www.biglots.com/help/contact-us...
-
Page 2: Maintenance
GENERAL BEST PRACTICES FOR ASSEMBLY: Read all instructions before starting Clear a flat covered space to assemble We recommend two people for assembly. Note that hardware required is provided for every step Pay attention to orientation Letter of the part corresponds to a sticker on the product Number of the hardware corresponds to its number in the package Helpful hints provided along the way Note: This product includes a tube of glue. -
Page 3: Parts List
PARTS LIST LEFT LEG RIGHT LEG BACK SUPPORT BAR FRONT SUPPORT BAR REAR RIGHT SUPPORT BAR REAR LEFT SUPPORT BAR BOTTOM PANEL TOP PANEL RIGHT SIDE PANEL LEFT SIDE PANEL BACK PANEL MIDDLE PANEL DRAWER FRONT PANEL LEFT SIDE PANEL OF DRAWER RIGHT SIDE PANEL OF DRAWER... -
Page 4: Hardware List
PARTS LIST BOTTOM PANEL OF DRAWER BACK PANEL OF DRAWER HARDWARE LIST UMBRELLA HEAD BOLT CAM LOCK PHILLIPS SCREW WOOD DOWEL GLUE ALLEN BOLT ALLEN BOLT HANDLE ALLEN WRENCH... - Page 5 STEP 1 Insert cam (1) into top panel (H) using a Phillips screwdriver (not provided) and full tighten. Insert Wood dowel (5) into top panel (H) using glue (6) as directed in GENERAL BEST PRACTICES section of page 2. Assembled View...
- Page 6 STEP 2 Assemble left side panel (I) and right side panel (J) to back panel (K) using wood dowels (5) and glue (6) as directed in GENERAL BEST PRACTICES section of page 2 . Assembled View...
- Page 7 STEP 3 Insert cam lock (2) into holes of side panel (I), side panel (J) and back panel (K). Apply small dab of glue to top of wood dowels in top panel (H). Carefully place assembled side and back panels (I), (J) and (K) onto top panel (H) and tighten cam locks (2) with Phillips screwdriver (not provided ).
- Page 8 STEP 4 Insert cam (1) into top panel (H) using Phillips screwdriver (not provided ). Insert wood dowel (5) into top panel (H) using glue (6) as directed in GENERAL BEST PRACTICES section of page 2. Insert cam lock (2) into holes of middle panel (L).
- Page 9 STEP 5 Insert wood dowel (5) into side and back panels (I), (J) and (K) using glue (6) as directed in GENERAL BEST PRACTICES section of page 2. Apply small dab of glue to top of wood dowels in side and back panels (I), (J) and (K) using glue (6).
- Page 10 STEP 6 Note: The side of back support bar (C) with the holes should be facing down Assemble front support bar (D) & back support bar (C) on left leg (A) and right leg (B) with Allen bolts (7) by using Allen wrench (9). Assembled View...
- Page 11 STEP 7 Assemble rear right cross bar (E) and rear left cross bar (F) with Allen bolts (7) by using Allen wrench (9). Assembled View...
- Page 12 STEP 8 Carefully place the assembled metal frame onto the bottom panel (G) and attach with Allen bolts (8) using Allen wrench (9). Assembled View...
- Page 13 STEP 9 Assemble right side panel of drawer (O) and left side panel of drawer (N) to back panel of drawer (P) with Phillips screws (3) using Phillips screwdriver (not provided). Assembled View...
- Page 14 STEP 10 Slide bottom panel of draw er (Q) into grooves of assembled side and back panels of drawer. Attach drawer front panel (M) to left and right side panels (not provided). of drawer using Phillips screws (3) and Phillips screwdriver Attach handle (10) to drawer front panel (M) with umbrella head bolts (4) using Phillips screwdriver (not provided).
- Page 15 STEP 11 Align the glides on the drawers with glides in the assembled drawer box. carefully insert the drawer. Note: If the drawer needs to be removed, depress the plastic levers on the drawer glides and hold to release the drawer. PLEASE NOTE: The drawers should slide completely into desk.
Need help?
Do you have a question about the ZS007R and is the answer not in the manual?
Questions and answers