Advertisement
•
A Phillips Screwdriver and a flat head screwdriver will be needed for assembly and are not provided.
•
Separate all parts before starting.
HOW TO INSTALL THE CAM BOLT AND CAM LOCK
HOW TO INSTALL NUTS
1
1 x 2
1
1
G
2
Insert Nut (10) into the holes of Bottom Panel (H).
TIP: The line on top of Nut (10) must be in line with the bolt.
10 x 4
HELPFUL HINTS
a
!
Important: Press a nut into the hole
in the part, making sure the "-" pattern
is facing up.
1. Insert Cam Bolt (1) into Bottom Trim Panel (G),
fully tighten.
2. Align the Cam Bolts (1) in Bottom Trim Panel (G)
2 x 2
with the holes in the edge of Bottom Panel (H)
and slide into place.
3. Secure the Panels together using Cam Lock (2).
G
b
H
10
H
10
10
10
Page 5 of 8
c
!
Important: Using a standard screw
driver, turn the nut until the "-" is
inline with the hole for the bolt.
2
2
H
Advertisement
