GENERAL BEST PRACTICES FOR ASSEMBLY: Read all instructions before starting Clear a flat covered space to begin Two adults are recommended for assembly Note that hardware required is provided for every step Pay attention to orientation Letter of the part corresponds to a sticker on the product Number of the hardware corresponds to its number in the package Helpful hints provided along the way WARNINGS:...
PARTS LIST DESCRIPTION Top Panel Left Side Panel Right Side Panel Under Top Slat Inner Shelf Panel 2pcs Back Panel Bottom Trim Panel Bottom Panel 2pcs Door Panel Plastic Slat 2pcs Metal Handle Hinge 4pcs Page 3 of 8...
HELPFUL HINTS • A Phillips Screwdriver and a flat head screwdriver will be needed for assembly and are not provided. • Separate all parts before starting. HOW TO INSTALL THE CAM BOLT AND CAM LOCK HOW TO INSTALL NUTS Important: Using a standard screw Important: Press a nut into the hole in the part, making sure the “-“...
Page 6
18 x 4 3 x 4 9 x 4 15 x 1 1. Insert Wooden Dowel (3) into the end of Bottom Trim Panel (G) and Under Top Slat (D). 2. Align the Wooden Dowels (3) in the end of Bottom Trim Panel (G) and Under Top Slat (D) with the holes in the leg of Left Side Panel (B) and Right Side Panel (C) and slide into place.
Page 7
4 x 4 1. Insert the Shelf Support (4) into the pre-drill holes in Left Side Panel (B) and Right Side Panel (C). 2. Place the Inner Shelf Panel (E) onto the Shelf Support (4). 1. Attach Hinges (L) to Door Panel (I) with Screw (5). 2.
Page 8
6 x 4 12 x 2 17 x 4 1. With assistance, align the holes in Top Panel (A) with the holes in Anchor Bracket (12). Attach Anchor Bracket (12) using Screw (6). Fully Tighten screws. 2. Cover the visible bolts in the side panels with PVC Sticker (17). 7 x 4 12 x 2 13 x 2...