Advertisement
c. Press [ PT ] button, indicator displays "
divisional value.
d. Press [ PT ] button, indicator displays "
choose parameters. When F1.1=0, it means normal calibration of two points
(zero point and another weighing point). When F1.1=1, it means calibration of
three points (zero point, weighing point 1 and weighing point 2). Usually F1.1=0
is chosen.
e. Press [ PT ] button, indicator displays "
calibrated, at this time check if there is nothing on the scale.
f. Press [ PT ] button, indicator displays "
pole is extinguished gradually. During this time the reading is unstable and the
light pole comes back to the full-bright state. If it keeps full-bright all the time,
please turn off the power supply to check wire connection of system or contact
our after-sales services department. After light pole fully extinguished, indicator
will turn to next step automatically.
g. When indicator displays "
poise is put on the scale and the poise whose weight is more than 20% of
maximum weighing value is recommended. The poise is put evenly or at the
center of scale.
h. Press [ PT ] button, indicator displays "
pole is extinguished gradually. During this time the reading is unstable and the
light pole comes back to the full-bright state. After light pole fully extinguished,
indicator will turn to next step automatically.
i. The value of loaded poise should be inputted when indicator displays maximum
weighing value XXXXX. Press [ Fn ] button, position of glittering can be chosen
and press [→0←] button, value of glittering bits can be amended.
j.
Press [ PT ] button, when F1.1=1, indicator displays "
F1.1=0, indicator displays "
When indicator displays "
of load is being amended. Adopting this method can improve it when linearity of
scale is not good. Then loading poise can be continued.
www.kelichina.com
", press [ Fn ] button to choose
", then press [ Fn ] button to
", calibrate the weighing value. Standard
, take calibration step 13 for reference.
", it means the non-linearity of second point
", it means zero will be
"meanwhile the light
", meanwhile the light
, when
Page 9 of 17
Advertisement
