Advertisement
Fig. 8.4-2
Before installation, mandril of both sides of weighing transducer should be removed
firstly, and then weighing terminal is put into the cabinet. The two mandrils are fixed
to both sides of weighing terminal tightly to guarantee the firm installation of
weighing transducer.
2.2. Connection of weighing transducer
a. Back View picture of weighing transducer
Fig. 8.4-3
b.
Connection to power supply
Weighing transducer adopts AV 220V with a 0.5A fuse under below part of socket. Check
power supply before connection.
www.kelichina.com
Page 4 of 17
Advertisement
