Advertisement
output will work according to chosen weight transducing range.
6.3. Adjust bottom and top of analog output
Calibrating four analog outputs before delivery, thus choosing mode of analog
output is enough when using it. Bottom and top of analog output can be changed if
necessary, for example, you can set analog output range from 1V to 4.5V.
Testing adjusting value with high-precise voltage or current meter, or connect to the
former machine to adjust it directly as well.
Adjustment steps:
a. Press [Fn] and [Tare] buttons simultaneously, indicator displays "
b. Press [PT] button continuously, indicating prompt of adjusting items can be
displayed circularly.
: Coarse adjustment of analog output bottom
: Fine adjustment of analog output bottom
: Elaborate adjustment of analog output bottom
：Fine adjustment of analog output top
：Elaborate adjustment of analog output top
:
Under adjusting items, press [0] button to increase value or press [Tare] button to
reduce value the required one and then press [Fn] button to quit out.
Adjustment just can affect current set-up analog output mode.
6.4. Reset of bottom and top of analog output.
Setting bottom and top of analog output as original value, when users adjust it to be
disordered, it can be reset quickly.
Reset method:
a. Press [Fn] and [Tare] buttons simultaneously, indicator displays "
b. Press [Fn] button continuously, indicator change to "
c. Press [PT] button when displaying "
analog output will be original analog quickly.
7. Indicator parameter selection
7.1. Turn into working parameters choice
a. Press [Fn] and [0] buttons simultaneously, indicator displays "
b. Press [Fn] button, indicator displays "
c. Press [PT] button, turn into parameter choice "F2.1", each parameter choice to
www.kelichina.com
：Coarse adjustment of analog output top
", turn it on again and the
"
".
"；
" and "
"；
"
Page 12 of 17
Advertisement
