Table of Contents
Advertisement
NOTE: The Searchlight should not be covered while the XRCiZ™
feature is enabled.
The Master Controller also has a searchlight motor timeout feature. If
a Point Pad™ rotation switch (right or left) is continuously engaged
for more than 50 seconds, the Master Controller will interrupt the
operation until the Point Pad™ switch is disengaged. This feature will
save the searchlight motor from burnout due to accidental activation.
The elevation motor has similar features which will timeout in
approximately 20 seconds.
Figure 6 - URC-103 Master Controller Wiring Diagram (Note:
Wiring must be in accordance with this diagram, improper
wiring will damage components)
Y1-03-0321C
Point Pad
12
Advertisement
Table of Contents
