Table of Contents
Advertisement
Wire Size
#8 AWG
#10 AWG
#12 AWG
Function
The URC-103 Master Controller is designed to perform up to six
different duties on searchlights, winches, and other electrical devices.
The Master Controller provides optimum voltage to ensure brightest
performance and long lamp life, regardless of boat system voltage
fluctuations. The Master Controller is compatible with devices
requiring 12 VDC or 24 VDC operation.
The URC-103 Master Controller has the unique XRCiZ™ feature. The
XRCiZ™ feature routinely operates all moving parts in the Searchlight
to keep the motors and drive mechanism freely running. Once
activated, and every 30 days thereafter, the XRCiZ™ feature wakes
up and operates the Searchlight. The Searchlight will rotate 360 in
both directions and the reflectors will move to the full up and down
positions. This feature keeps the Searchlight in peak working order
when not in service for long periods of time.
To activate the XRCiZ™ feature, press and hold the Point Pad™
ON/OFF button for greater than 5 seconds. The green LED on the
URC-103 Point Pad™ indicates that the XRCiZ™ feature is enabled.
While enabled, The XRCiZ™ feature can be started outside of its 30-
day cycle by pressing and holding the Speed button on the Point
Pad™ for greater than 5 seconds.
While the XRCiZ™ feature is operating the Searchlight, pressing any
Point Pad™ button will stop the current cycle and leave the
Searchlight to follow any additional commands. To deactivate the
XRCiZ™ feature, press and hold the Point Pad™ ON/OFF button for
greater than 5 seconds. The Red LED on the URC-103 Point Pad™
indicates that the XRCiZ™ feature is disabled.
Y1-03-0321C
Maximum Cable Length
12v System
25 ft.
15 ft.
10 ft.
Table 2
24v System
100 ft.
60 ft.
40 ft.
11
Advertisement
Table of Contents
