Table of Contents
Advertisement
8. CONTROL ROOM COMPONENT ASSEMBLY
PRONGS
8.1 The power cord for the amplifier
has two bayonet-style prongs . Line
up the prongs with the hole labeled
24 VDC POWER . Insert the cord plug
and twist to lock into place . If you are
unable to pull straight out, the cord is
connected correctly .
.4 Plug the RCA cord into the slots
8
labeled INPUT 2 . The white marked
cord should go in white slot . The red
marked cord should go in red slot .
IM-1505 Rev. D
8.2 Plug the Bose Speakers terminal
clip (670-10) into the slot labeled
ZONE 2 OUTPUTS.
8.5 Plug the RCA cord audio jack into
the left bottom audio port on the iPad .
8.3 Plug the other end of the Bose
Speakers connection cord into the
slot labeled AUX IN. Plug the power
cord from the wall outlet into the
middle slot labeled POWER . Plug
the secondary speaker cord (670-36)
into the bottom slot labeled LEFT
SPEAKER .
15
Advertisement
Table of Contents
