Canon PIXMA MP450 User Manual page 61

Scanning With The Operation Panel Of The Machine
You can start the scan operation with the Operation Panel of the machine. (See the Scan Guide)
If you are using Windows XP
The program selection screen is displayed the first time you press [Color] or [Black] on the
machine. Specify [MP Navigator 2.0] as the application software to use, check [Always use this
program for this action], then click [OK]. From the next time, MP Navigator is automatically
started.
When using Mac OS X
For the machine to start scanning when [Color] or [Black] is pressed, you need to set MP
Navigator as the starting application software in Image Capture under [Applications] of Mac
OS X.
Important
If you are using Macintosh OS X v.10.3.x
Select [Applications] from the [Go] menu, then double click [Image Capture]. Click [Options] at
lower left of the scanner window, select [MP Navigator 2.0] from [Application to launch when
scanner button is pressed], then click [OK].
Important
If you are using Macintosh OS X v.10.2.x
Select [Applications] from the [Go] menu, then double click [Image Capture]. Select
[Preferences] from the [Image Capture] menu. Select [Others] from [When a scanner button is
pressed, open], select [MP Navigator 2.0] from [Applications], then click [Open].
1
Load the document on the Platen Glass. (See page 15)
2
Press [SCAN].
The scan operation selection screen is displayed.
(1) The document is scanned and saved.
(2) The document is scanned and stored as a PDF file.
(3) The document is scanned, and the image is attached to an e-mail using the e-mail
application software.
(4) The document is scanned and displayed on the registered application software.
3
Use [ ] or [ ] to select the scan operation, then press [OK].
Chapter 6
Make sure that the MP Navigator is installed and that the Macintosh is
connected to the machine before starting up Image Capture.
If you select [Preferences] from the [Image Capture] menu, click
[Scanner], and mark [Use TWAIN software whenever possible], [Options]
is not displayed. In this case, click [Use TWAIN software whenever
possible] to uncheck the option, exit the Image Capture, then start it
again.
(1)
(2)
(3)
(4)
Scanning Images
59