Turning The Power Off; Turn The Power On - Canon PIXMA MX350 Series Getting Started Manual

3
Use the { or } button (C) on the Operation Panel
to select the language for the LCD (Liquid Crystal
Display) (D), then press the OK button.
10

4 Turn the Power On

4
D
C
Make sure that the above screen is
displayed and go to the next step.
• If an unintended language is
displayed on the LCD, press the
Back button (E) to return to the
Language selection screen.
□

Turning the power off

Be sure to follow the procedure below.
E
1. Press the ON button (A) to turn off the machine.
2. Make sure that all the lamps on the Operation Panel
are not lit.
A
1
Operating noise may continue for up to 30 seconds until the
machine turns off.
• When removing the power plug, make sure that all the
lamps on the Operation Panel are not lit before removing
the plug. Removing the power plug while all the lamps on
the Operation Panel light up or flash may cause drying and
clogging of the FINE Cartridges, resulting in poor printing.
If your machine is used as fax
• Removing the power plug deletes all faxes stored
in memory. Send or print faxes as necessary before
removing the power plug.
2