Canon PIXMA MX350 Series Getting Started Manual page 32

7
Make sure that the network key is correct, then
press the OK button.
0
10 Wireless Setup
8
When the above screen appears, press the OK
button.
The Setup menu screen returns.
• If Failed to connect to the access point.
appears, press the OK button, make sure that
the network key is correct, then enter it again.
If a connection still cannot be established,
refer to the printed manual: Network Setup
Troubleshooting.
9
F
Press the COPY button (F).
The copy standby screen is displayed.
Next, read "12 Install the Software
(Network Connection)" on page 43!