Need Help - Chamberlain myQ Home Bridge Quick Start Manual

myQ APP
®
1. Power the myQ Home Bridge by plugging it in. The blue LED will
start blinking.
2. Download the myQ app or open the app if it is already installed.
3. Create an account or sign-in.
4. Press "+" or " " icon and select myQ-nnn under Discovered
Accessories/Devices.
INSTALL
1. Check the Wi-Fi signal in the garage, where the myQ Home Bridge will be mounted.
2. Make sure you have two or more Wi-Fi bars.
NOTE: If there are signal strength issues, please visit
https://www.LiftMaster.com/wifisupportvideos.
3. Install the myQ Home Bridge on the ceiling near the garage door opener, or in a
convenient location in the garage within Wi-Fi range.
TIP: Wrap excess power adapter cable around the mounting bracket.
4. Plug it in and make sure the green LED turns on solid.
5. Attach the warning label to the wall next to the door control.
Communication between iPhone, iPad, or iPod touch and the HomeKit-enabled myQ
secured by HomeKit technology and Security+ 2.0
Controlling this HomeKit-enabled accessory automatically and away from home requires an Apple
TV with tvOS 10.0 or later or an iPad with iOS 10.0 or later set up as a home hub.

Need Help?

Go to: www.LiftMaster.com/myQSupport
.
®
device is
®