Canon imagePROGRAF iPF6300S Basic Guide No.1 Basic Manual page 15

2
Insert the attachments for the roll paper on the Roll
Holder .
• Using rolls with a 3-inch paper core
Attach the included 3-Inch Paper Core Attachment on
the Roll Holder .
Align the triangular part (b) of the 3-Inch Paper Core
Attachment (a) with the triangular part
(c) of the Roll Holder as shown, and insert the 3-Inch
Paper Core Attachment into the Roll Holder .
Use the Holder Stopper for 3-inch paper cores.
• Borderless printing on A1 or A2 rolls
Attach the included Spacer for Borderless Printing to
the Roll Holder .
Insert the protrusions (b) of the Spacer for Borderless
Printing (a) into the holes (c) of the Roll Holder , as
shown.
3
With the Roll Holder resting horizontally and the edge of
the roll paper facing forward as shown, insert the roll in
the Roll Holder from the left. Insert the roll fi rmly until it
touches the fl ange (a) of the Roll Holder , leaving no gap.
• Always have the Roll Holder resting horizontally when loading rolls. Attempting to load rolls with the
Roll Holder upright may damage the Roll Holder .
4
Insert the Holder Stopper from the left in the Roll Holder
as shown. Push it fi rmly in until the fl ange (a) of the
Holder Stopper touches the roll.
Attach the appropriate Holder Stopper for the size of the
paper core.
15
Loading Rolls on the Roll Holder
c
b
a
a
b
c
a
a