Loading Sheets In The Printer - Canon imagePROGRAF iPF6300S Basic Guide No.1 Basic Manual

When printing on individual sheets, load the sheet in the Top Paper Feed Slot . However, for heavyweight paper
such as POP board, load the sheet in the Front Paper Feed Slot .
Selecting the Paper Source and Type of Paper
If a print job was received
Sheets are automatically selected, and the media type and size specifi ed by the print job are shown on
the Display Screen .
1
Press ▲ or ▼ to select Load Paper , and then press the
OK button.
2
Load the sheet in the Top Paper Feed Slot or Front
Paper Feed Slot , depending on the type of paper
specifi ed by the print job.
• If a type of paper other than POP Board is selected,
load it in the Top Paper Feed Slot .
• If POP Board is selected, load it in the Front Paper
Feed Slot .
If no print job was received
1
Press the Load button.
2
Press ▲ or ▼ to select Cut Sheet , and then press the OK
button.
• If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes , and then press the OK button. Remove the paper and go to the next step.
3
Press ▲ or ▼ to select the type of paper, and then press
the OK button.
When printing on heavyweight paper, select POP Board
and load the sheet in the Front Paper Feed Slot .
When printing on other types of paper, select the type of
paper and load the sheet in the Top Paper Feed Slot .
• For details on types of paper to select, see the Paper Reference Guide .
(→

Loading Sheets in the Printer

Load sheets in the printer as follows.
, The Manuals Supplied with This Printer)
20