User Telephone Number And Unit Name; Date And Time - Canon imageCLASS MF5880dn Starter Manual

The display returns to the standby mode:
●
The machine may enter the standby mode (Auto Clear function) while you
are setting it up. Make the setting again from the main menu.
The display turned OFF:
●
The machine may enter the Sleep mode while you are performing setup.
Press [Energy Saver] to turn the display back ON and continue the setup.
User Telephone Number and Unit
Name
1
Press [Menu].
2
Press or to select <4. TX/RX
SETTINGS>, then press [OK].
3
Press or to select <3. FAX
SETTINGS>, then press [OK].
4
Press or to select <2. USER
SETTINGS>, then press [OK].
5
Press or to select <1. UNIT
TELEPHONE #>, then press [OK].
6
Use – , [numeric keys] to enter your fax/
telephone number, then press [OK].
Ex.
U N I T T E L E P H O N E
1 2 3 X X X X X X X
Maximum number of digits: 20 digits including spaces
If you accidentally enter an incorrect number, press
or / [Clear] to delete the last number.
7
Press [Menu] twice.
8
Press or to select <2. TX/RX
COMMON SET.>, then press [OK].
9
Press or to select <1. TX SETTINGS>,
then press [OK].
10
Press or
NAME>, then press [OK].
11
Use – , [numeric keys] /
enter the unit name, then press [OK].
Ex.
U N I T N A M E
C A N O N
#
to select <1. UNIT
[Tone] to
: a
− Maximum number of characters: 24 characters
including spaces
− Unit name: your name, company name, etc.
If you accidentally enter an incorrect character, press
or to move the cursor to the character that needs
correction and press [Clear] to delete the character.
12
Press [Stop/Reset] to return to the
Standby mode.

Date and Time

1
Press [Menu].
2
Press or to select <7. TIMER
SETTINGS>, then press [OK].
3
Press or to select <1. DATE&TIME
SETTING>, then press [OK].
4
Use – , [numeric keys] to enter the date
and time, then press [OK].
Ex.
D A T E & T I M E
0 4 / 0 1 / ' 1 0
− Date: month/day/year
− Time: in 24-hour/military time format
If you accidentally enter an incorrect number, press
or to move the cursor to the number that needs
correction and overwrite it.
5
Press [Stop/Reset] to return to the Standby
mode.
–
You can select one of the following three date formats
in <3. DATE TYPE SELECT>.
<MM/DD/YYYY>
<DD/MM YYYY>
<YYYY MM/DD>
–
By default, the time zone is set to <GMT-5:00>. If
necessary, change <2. TIME ZONE SETTING> in the <7.
TIMER SETTINGS> menu to match the time zone at your
location. For details, see "Introduction of the Machine, "
in the e-Manual.
–
By default, the daylight saving time is <OFF>. If
necessary, change <6. DAYLIGHT SV. TIME> in the
<7. TIMER SETTINGS> menu to <ON>. For details, see
"Introduction of the Machine, " in the e-Manual.
3 Make Fax Settings
S E T T I N G
1 5 : 5 0
9