Canon imagePROGRAF iPF6350 Basic Guide No.1 Basic Manual page 40

Replacing the Printhead
8
With the nozzles facing down and the metal contacts
toward the back, insert the Printhead into the Carriage .
Carefully push the printhead fi rmly into the Carriage ,
ensuring that the nozzles and metal contacts do not touch
the carriage.
9
Pull the Printhead Fixer Cover down toward the front to
lock the Printhead in place.
10
Push the Printhead Fixer Lever toward the back of the
printer until it clicks.
11
Close the Top Cover .
Ink now fi lls the system. It takes about 11 minutes for ink
to fi ll the system.
• Never remove an Ink Tank while the system is fi lling with ink.
• After the Printhead has been replaced and fi lled with ink, Head Posi. Adj. ( Auto(Advanced) ) is
performed if you have selected Rep.P.head Print > On in the Control Panel menu. In this case, follow
the instructions displayed for Printhead adjustment.
If Rep.P.head Print is Off , perform Head Posi. Adj. ( Auto(Advanced) ) yourself.
(→ , If Vertical Lines are Warped or Colors are Misaligned)
40