Canon imagePROGRAF iPF6350 Basic Guide No.1 Basic Manual page 22

Loading Sheets in the Printer
4
Move the Width Guide (a) to match the size of paper
loaded.
Set the Width Guide against the edge of the paper to
prevent the paper from becoming crooked or wrinkled.
5
Press the OK button.
• If a print job was received
After the paper is advanced, the printer starts printing
the print job.
• If no print job was received
The printer now starts feeding the paper.
Loading Heavyweight Sheets in the Front Paper Feed Slot
• Always load POP Board in the Front Paper Feed Slot for printing. Loading it in other ways may impair operation
and damage the printer.
• Load only one sheet at a time.
• Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
• Straighten paper if it is warped before loading it.
• Load the paper straight. Loading paper askew will cause an error.
• After loading the paper, you cannot move it laterally to reposition it. Load the paper straight.
1
If the message Leave 70cm (28") space behind printer.
is displayed, check the space behind the printer, pull up
the four Front Tray Guides above the Ejection Guide ,
and press the OK button.
• Suffi cient space behind the printer is required when loading paper in the Front Paper Feed Slot . For
details on the installation space required, see the following section.
(→"Specifi cations," User Manual)
22
a