Canon imagePROGRAF iPF6350 Basic Guide No.1 Basic Manual page 31

3
Press the OK button and insert the Ink Tank into the
holder facing as shown, with the ink holes down.
• Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.
If the Ink Tank does not fi t in the holder, do not force it into the holder. Make sure the color of the Ink
Tank Lock Lever matches the color of the Ink Tank , and check the orientation of the Ink Tank before
reloading it.
4
Push the Ink Tank Lock Lever closed until it clicks into
place.
5
Make sure the Ink Lamp is lit in red.
• If the Ink Lamp is not lit, reload the tank.
6
Close the Ink Tank Cover .
31
Replacing Ink Tanks