Scanning Hints - Canon imageFORMULA DR-2050C User Manual

6. Scanning Hints

This section describes helpful hints for setting up and using your scanner.
Refer to these hints when you set up the ISIS/TWAIN driver. For more details
on items not described in this section, see "Software Settings," on p. 49.
Scanning Double-sided Documents
• I want to scan a double-sided document.
Set Scanning Side to [Duplex].
See "ISIS Driver Settings g," on p. 50, and "TWAIN Driver Settings g,"
on p. 52.
Scanning Non-standard Size Documents
• I want to scan non-standard size documents
When a non-standard size document is scanned with a standard size
specified, a black margin around the scanned image. If you want to scan
nonstandard size documents, set "Page Size" to [Auto-detection]. The size of
the document is automatically detected.
See "ISIS Driver Settings c," on p. 50, and "TWAIN Driver Settings c,"
on p. 52.
• I want to register non-standard size documents
A non-standard document size can be registered as a Custom Paper Size.
See "ISIS Driver Settings l," on p. 50, and "TWAIN Driver Settings l,"
on p. 52.
• I want to scan only part of a document
The scan area can be specified before scanning. Note, however, that the scan
area cannot be specified when "Page Size" is set to [Auto-detection].
See "ISIS Driver Settings m," on p. 50, and "TWAIN Driver Settings m,"
on p. 52.
44
Using the Scanner