Canon imageFORMULA DR-2050C User Manual page 99

Keep this Quick Guide near the scanner for ready reference.
Basic Setup Dialog Box
1 1 1 1 1 User Preference
Name and save your settings.
Names can consist of up to 32 characters.
2 2 2 2 2 Mode
Selects the scanning mode.
[Text Enhanced] and [Advanced Text Enhancement
2] process the background of a document so the
text is enhanced and easier to read.
The Smoothing Gray/Color options used to smooth
images and reduce moiré patterns are available
when [400 dpi] Dots per inch or below is selected.
3 3 3 3 3 Page Size
Selects the size of the pages to be scanned.
Selecting [Auto-detection] causes automatic page
size detection when scanning.
4 4 4 4 4 Dots per inch
Selects scanning resolution.
5 5 5 5 5 Brightness
Adjusts brightness of scanned images.
[Brightness] is set automatically when the Text
Enhanced mode is selected.
6 6 6 6 6 Contrast
Adjusts contrast of scanned images.
[Contrast] is set automatically when the Black and
White or Text Enhanced mode is selected.
7 7 7 7 7 Scanning Side
Specifies the side of the document to scan.
When [Skip blank page] is selected, images are
skipped if they are determined blank based on the
[Ratio of black pixels] value.
When [Folio] is selected, both sides of a document
are scanned, and the images displayed are
combined into one image. For details, refer to the
user's guide.
When the [Reverse side] check box is selected, a
mirror image of the scanned document is
displayed.
[Ratio of black pixels] specifies the ratio of black
areas (0 to 20%) when skipping blank pages.
8 8 8 8 8 Feeding Option
Selects the document feeding method.
[Standard Feeding] scans loaded documents after
starting scanning from the application program.
[Panel-Feeding] scans loaded documents after
pressing the scanner's scan button.
[Automatic Feeding] starts scanning whenever the
scanner detects a loaded document.
9 9 9 9 9 Batch Separation
This setting is enabled when the [Panel-Feeding] or
[Automatic Feeding] Feeding Option is selected.
Documents can be scanned as separate batches.
When [Auto] is selected, batch separation is
performed when scanning with [Panel-Feeding] or
[Automatic Feeding] starts.
When [Panel] is selected, batch separation is
performed when the batch separation button in the
Scan Panel is clicked.
0 0 0 0 0 Deskew
When a document page feeds at a slant, the scanned
image is straightened.
A A A A A Prescan
When scanning starts, a page of the document is
scanned and its image is displayed in the Prescan
window.
ISIS Driver Quick Guide
Scan Area Dialog Box
B B B B B Page Size
Selects the size of the pages to be scanned.
C C C C C Area
Specifies the area to be scanned.
D D D D D Area Window
The appearance of this window indicates the current
Page Size setting.
Advanced Settings Dialog Box
E E E E E Drop-out color
Enabled for all scanning modes except [24-bit Color],
this function selects skipping (drop-out) of red, green,
or blue or enhancement of red when scanning the front
or back of documents.
F F F F F Gamma
To alter the standard gamma curve, select [Custom]
Gamma Data and change the gamma curve. For
details on this setting, click the Help button.
G G G G G Edge emphasis
Enhances contours in scanned images.
H H H H H Border Removal
Removes the black border that may be created around
scanned images.
I I I I I Scanner Adjustment
Scanner Adjustment is a function used to adjust the
reference values of the scanner when abnormalities
occur within the scanned images, and normal
maintenance does not remedy the problem. For details
on Scanner Adjustment, refer to "Adjusting the
Scanner" (see P.75) in the user's guide.
This Quick Guide describes the dialog boxes displayed
by CapturePerfect. Depending on your application
program, the basic setup dialog box may not be
displayed. In this case, the Advanced Settings dialog
box, which includes some of the functions in the basic
setup dialog box, is displayed. Click the Help button for
details.
Click [Custom] to register a non-standard document
size as a custom page size.
These settings are disabled when [Auto-detection]
is selected for the Page Size.
The specified scan area can be adjusted by
dragging the mouse.